The 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
- Paint and electroplated coatings on iron and steel and other ferrous metals (DFN model)
- Paint and anodising coatings on non-ferrous metals and on austenitic stainless steels
The user will select one or more probes best suited for their application to connect to the 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small micro0chip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.
Eight (8) separate probes are offered for a wide variety of applications.
Features
- Automatic identification of the substrate
- Highly wear-resistant measuring poles made of carbide metal
- Special probes for unusual measurement tasks
- Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces
- Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings
- Display backlight for poor ambient lighting conditions
- Online statistics with all statistical parameters
- Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches"
- Alphanumerical file names can be used to identify each of the separate files "batches"
- Infrared interface for wireless data transfer to printer and PC or via built-in RS-232
- Includes FREE software for transferring data to a PC including histogram function
- Optional high temperature footer for measuring on surfaces up to 150 °C/302 °F
- Includes NIST-Traceable Calibration Certificate
-
1 Year Warranty
Available Probes
|
Probe |
Range |
|
Standard Probes |
|
|
F |
0 – 60 mils (0 – 1500 ìm) |
|
N |
0 – 60 mils (0 – 1500 ìm) |
|
FN |
0 – 60 mils (0 – 1500 ìm) |
| 90° Wand Probe for measuring hard to reach areas |
|
|
FN90 |
0 – 60 mils (0 – 1500 ìm) |
| Micro Probe for very thin coatings |
|
|
FN02 |
0 – 8 mils (0 – 200 ìm) |
| Probes for thick coatings |
|
|
F35 |
F: 0 – 140 mils (0 – 3500 ìm)
N: 0 – 120 mils (0 – 3000 ìm) |
|
FN35 |
0 – 140 mils (0 – 3500 ìm) |
|
F10 |
0 – 400mils (0 – 10 mm) |
|
"F" Probes measure Coatings on Ferrous Metals
"N" Probes measure Coatings on Non-Ferrous Metals
"FN" Probes measure Coatings on both Ferrous & Non-Ferrous Metals |
|
|
Additional Info:
 |
-
Measuring principle:
-
Measuring range:
-
Tolerance: ± (0.7 µm/0.04 mils + 1% of reading)
-
Resolution:
-
mil
-
0.00 - 9.99 mils 0.01 mils
-
10.00 - 24.98 mils 0.02 mils
-
25.00 - 49.95 mils 0.05 mils
-
50.0 - 99.9 mils 0.1 mils
-
Microns (µm)
-
0.0 - 99.9 µm 0.1 µm
-
100.0 - 249.8 µm 0.2 µm
-
250.0 - 499.5 µm 0.5 µm
-
500 - 999 µm 1 µm
-
1.000 - 1.998 mm 0.002 mm
-
Display: 4-digit display (digit height 10 mm/0.4”) and 32 alphanumerical characters; switchable backlight
-
Minimum measurement area: 5 mm x 5mm/0.2” x 0.2”
-
Minimum curvature radius:
-
convex 2mm/0.08”;
-
concave 5mm/0.2”
-
Minimum substrate thickness: 0.2mm/8 mils (for F-versions); 50 µm/2 mils (for N-versions)
-
Calibration methods:
-
Factory calibration: no calibration required for standard applications
-
Zeroing (1-point calibration): measurements on small geometries
-
Zeroing and foil calibration (2-point calibration): increased measuring accuracy
-
Two-foil calibration: especially for rough, sand-blasted surfaces
-
CTC: calibration on coated object if zeroing is not possible
-
Zero offset: addition/subtraction of a constant value to/from the reading
-
Limit values: Selectable; optical and acoustic signal if limit value is exceeded
-
Scan mode: For continuous measurements; for the quick recognition of coating thickness variations; with permanent display of minimum and maximum reading
-
Statistics:
-
Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings
-
Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings
-
Data memory: 10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable
-
Interfaces: Infrared and serial RS232 interface
-
Language: Operator prompting and documentation in German, English, French (optional other languages)
-
Operating temperature: 0 °C to 50 °C/32 °F to 122 °F (storage temperature - 20 °C to +60 °C/-4 °F to 140 °F)
-
Surface temperature:
-
Power supply: 2 x round cell (AA) 1.5 V up to 60 hours of operating time
-
Housing/keypad: Protection class IP52 (protection against dust and dripping water)
-
Dimensions: Gauge: 140 mm x 62 mm x 30mm/5.6” x 2.5” x 1.2” (HxWxD)
-
Probe: dia. 14 mm x 83mm/dia. 0.56” x 3.3”
-
Weight: approx. 200 g/7 oz (gauge including batteries and probe)
-
Standards: DIN EN ISO, ASTM, BS
-
Warranty 1 Year
-
Calibration Certificate Included
|
|
|
| Accessories for this product... |
|
|
|
|
