 |
 |
 |
|
Features
- Four simultaneous LCD displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage and current measurements of sine, square, triangular and distorted wave forms with a crest factor<5
- Plug device to be tested directly into the Power Analyzer
- Built-in Datalogger that stores up to 1,012 readings. Choice of single record storage or continuous datalogging
- Choice of battery or AC adaptor power
- Max Recall, Data Hold, Overload Protection
- Sampling (update) rate is 2.5 times per second
- Windows 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correctioni
- Includes software, serial cable, 8AA batteries, power cord, 117 VAC adaptor, and built in carrying case
Appliations:
- Measure and Audit power consumption of single phase devices
- EValueate load perfomance under varying line conditions
- Demonstrate effectiveness of power conservation efforts
- Characterize device AC power requirements
Specifications / Range / Resolution / Basic Accuracy (%rdg) / Input Signal Range
- Watt (AC/DC) : 200/2000W / 0.1/1W / +/-(0.9%_4d)@50/60Hz / 300V,20A, 40-400Hz
- Power Factor: 0.5 to 1.0 / 0.001 / (Based on W,V,A) / 250V, 20A, 50/60Hz
- Voltage: 200.0/750W / 0.1/1V / +/-(0.5%) / 1000VDC, 750VAC
- Current: 2/20A via terminals / +/-(0.5%) / (Fuse Protection); 2.15A via sockets
- Frequency: 40Hz to 20kHz / 1Hz to 10Hz / +/-(0.5%)
- Dimensions/Weight: 13.9x11.8x3.9" (352x300x100mm) / 3.6 lbs (1.6kg)
Download User's Manual
|
|
|
 |
|
 |
|
