(281) 957-5283

RDI on google+

We accept Visa, Mastercard, American Express and PayPal.




Subscribe to Our Newsletter


(Your shopping cart is empty)

  Home > Vibration > Analyzers and Data Collectors >

ADASH A4900 M-EX Intrinsically Safe Vibration Meter
ADASH A4900 VIBRIO M EX Intrinsically Safe Vibration Analyzer
 
Our Price: $6,995.00
Sale Price: $5,596.00
You save $1,399.00!
Special Instructions: For Sale in the United States and Canada Only

Product Code: CMS-A4900-VIBRIO-M-EX
Qty:

Description
 
The A4900 - Vibrio M Ex instrument allows you to perform all basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and lubrication assessment. The A4900 - Vibrio M Ex is equipped with 4 MB of memory for data storage. Data memory allows you to perform off-route and route measurements.

The professional software DDS for Vibrio M Ex can be downloaded from the Adash website free of charge. Our expert system for automatic machine fault detection is included.

The A4900 Vibrio M Ex is supplied as a complete system including quality piezoelectric sensor, magnet and coiled cable for industrial use.

A4900 Vibrio M Ex key features:
  • All basic vibrodiagnostics measurements:
    • Overall values
    • Time signal
    • Frequency bands
    • FFT Spectrum
    • Route measurement
  • 4 MB memory for data storage
  • detects unbalance, loosenes, misalignment or bearing faults
  • ISO 10816-3 included
  • 8 hours of operation
  • determines the condition of your bearings, including slow-running ones

Vibrio M Ex

DDS2014 Vibration Monitoring Program for Vibrio M


Unbalance, looseness and misalignment
Adash A4900 Vibrio III; unbalance, looseness, misalignment
This screen gives an overview of the conditions of the followings by traffic light:

- unbalance
- looseness
- misalignment

Traffic light on the left (vertical) indicates the overall vibration condition
Traffic light on the right (vertical) indicates the bearing condition

Vibration levels
Adash A4900 Vibrio III, ISO10816-3, InfraRed bearing temperature, RPM
A4900 measures the RMS vibration level; and compare with the severity limits of ISO10816-3. Readings change in the Traffic Light color when an alarm is exceeded.

Bearing temperature is measured by infra-red and indicated in the traffic light. Overheating of a bearing can be easily identified in the RED bar as shown in the figure (left side). Temperature reading is shown in another screen.

RPM is automatically detected and displayed at the bottom of the screen.
Bearing fault detection
Adash A4900 Vibrio III; g-ENV; bearing envelope acceleration
A4900 Vibrio M measures the g-ENV, which represents the condition of the bearing.

A4900 Vibrio M also display the vibration time signal. You can visualize the vibration impact due to a bearing fault by looking at its time signal. It is useful in differentiating whether the increase in g-ENV is due to a bearing fault or just lack of lubrication.

You can also listen to the vibration signal through the audio output, that is a proven technique for bearing fault detection especially for slow rotating machine.
Vibration Spectrum
Adash A4900 Vibrio III; FFT spectrum
A4900 Vibrio M measures the FFT spectrum; and list out the most dominates peaks to facilitate analysis.




Browse for more products in the same category as this item:

Vibration > Analyzers and Data Collectors
Intrinsically Safe > Vibration Meters
Reliability Direct, Inc.
900 W. Main Street
Ephrata, PA 17522
 Contact Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback