• Model AN100 — CFM/CMM Thermo-Anemometer
• Simultaneous display of Ambient Temperature and Air Flow or Air Velocity
• Up to 8 easy to set Area dimensions (ft 2 or cm2) are stored in the meter’s internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable
• Data Hold and MIN/MAX
• Auto Power off
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, protective rubber holster, and carrying case

• HVAC installation, repair, diagnostics, and optimization.
• Fume hood testing, installation, and verification
• Ventilation system installation, servicing, and analysis
• Environmental wind and temperature testing/analysis
• Boiler rooms
• Ionizer flow output monitoring
• Automobile aerodynamic testing
• Plant/Facilities Maintenance

Specifications	Range	Resolution	Basic Accuracy
Air Velocity	0.40 to 30.00 m/s 1.4 to 108.0 km/h 80 to 5906 ft/min 0.9 to 67.2 mph 0.8 to 58.3 knots	0.01 m/s 0.1 km/h 1 ft/min 0.1 mph 0.1 knots	±3% m/s ±3% km/h ±3% ft/min ±3% mph ±3% knots
Air Temperature	14 to 140˚F (-10 to 60˚C)	0.1˚F/˚C	±6.0˚F (3˚C)
InfraRed Temperature (AN200 Only)	-58 to -4˚F (-50 to -20˚C) -4 to 500˚F (-20 to 260˚C)	0.1˚F/˚C 1˚F/˚C	±9.0˚F (5.0˚C) ±2% reading or ±2˚F (˚C) whichever is greater
Airflow	0 to 9999 CMM (m3/min) 0 to 9999 CFM (ft3/min)	0.1 0.1
Dimensions/Weight	7 x 2.9 x 1.3" (178 x 74 x 33mm)/1.6lbs (700g)