|
CMCP-1100 General Purpose Industrial Accelerometer
|
|
CMCP-200-01 Accelerometer Mounting Pad 1/4" Thick
|
|
CMCP-1100HT High Temp Industrial Accelerometer
|
|
|
|
Our Price: $9.00
|
|
|
|
Our Price: $139.00
|
|
|
|
|
|
- Small Size Case, 1/2” x 1.05”,
- Small Footprint, 1/2”
- Integral Cable (5, 10 or 20 Meters)
- 100 mV/g Sensitivity
- 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
- Waterproof
|
Epoxy To Machine For Ideal Mounting of Industrial Accelerometers - 416 SS (non-magnetic)
- Lapped for ideal accelerometer mounting surface
- 1/4"-28 Tapped Hole
- 1/4" Thick
|
- High Temperature Rating - 120°C, 250°F
- Small Size Case, 1/2” x 1.05”,
- Small Footprint, 1/2”
- Integral Cable (5, 10 or 20 Meters)
- 100 mV/g Sensitivity
- 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
- Waterproof
|
|
|
CMCP-210 Acrylic Adhesive Bypacs
|
|
CMCP-211 Loctite Depend 330 with Spray Activator
|
|
CMCP-1100S Side-Exit, General Purpose Industrial Accelerometer
|
|
Our Price: $12.00
|
|
|
|
Our Price: $35.00
|
|
|
|
Our Price: $135.00
|
|
|
|
|
|
For mounting CMCP-200 accelerometer mounting pads- Strongest and most resistant adhesive
- 2-parts blended within the bypac
- Enough for 2 mounting pads
|
Cost effective mounting of CMCP-200 accelerometer mounting pads- 25-50 applications
- -60F to 250F (-51C to 121C)
- 1 Minute setup time
|
- Low Profile
- Small Size Case, 1/2” x 1.05”,
- Small Footprint, 1/2”
- Integral Cable (5, 10 or 20 Meters)
- 100 mV/g Sensitivity
- 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
- Includes Indexing Washers
- Waterproof
|
|
|
CMCP-220 Accelerometer Adhesive Mounting Kits
|
|
CMCP-701 Piloted End Mill
|
|
CMCP-710 Indexable Counter Bore Kit
|
|
|
|
Our Price: $160.00
|
|
|
|
Our Price: $695.00
|
|
|
|
|
|
Includes all that you need to mount accelerometer mounting pads- 1/4"x1" SS Mounting Pads
- Adhesive Bypacs
- Silicone Dielectric
- Piloted End Mills
|
Disposable piloted end mill / spot reamer for accelerometer mounting- Quickly prepare bearing housing with a 1" spot
- Ensures true perpendicular mounting
|
Professional piloted end mill / spot reamer for mounting multiple accelerometers- Quickly prepare bearing housing for Accelerometer mounting
- Creates a 1" flat spot perpindicular to the mounting hole
- Replaceable inserts for long tool life
|
|
|
CMCP-1200 General Purpose Industrial Accelerometer
|
|
CMCP-205 Accelerometer Motor Fin Mounts
|
|
Wilcoxon 786A General Purpose Accelerometer
|
|
Our Price: $129.00
|
|
|
|
|
Our Price: $185.00
|
|
|
|
|
|
- Small Size Case:, 0.6250” x 1.735”
- 100 mV/g Sensitivity
- 0.32 Hz to 10 KHz Frequency Range (± 3 dB)
- 1/4”x28 UNF Standard Mount
- MIL Spec C-5015 Industry Standard 2-Pin Connector
|
Epoxy Between Motor Cooling Fins for an Ideal Accelerometer Mounting Location- Available in four sizes
- 416 SS
- Obtain accurate vibration data
- No need to machine down fins
|
Sensitivity: 100mV/g +/-5% Frequency Response: 0.5 Hz - 14 KHz Exit Type - Connector: top, R6 type - 2 pin Max. Temperature: 120°C Mounting: 1/4-28
|
|
|
Wilcoxon 793 General Purpose Accelerometer
|
|
Wilcoxon 793T-3 Multi-Function Accelerometer (Temp. and Accel.)
|
|
Wilcoxon 793V Piezo-Velocity Accelerometer
|
|
Our Price: $285.00
|
|
|
|
Our Price: $345.00
|
|
|
|
Our Price: $345.00
|
|
|
|
|
|
Sensitivity: 100mV/g +/-5% Frequency Response: 0.5 Hz - 15 KHz Exit Type - Connector: MIL-C-5015 - 2 pin Max. Temperature: 120°C Mounting: 1/4-28
|
Sensitivity: 100mV/g Frequency Response: 0.5 Hz - 15 kHz Exit Type / Connector: top, R6GSL type, 3 pin Max. Temperature: 120°C Mounting: 1/4-28
|
Sensitivity: (+/-10%)100mV/inches/S Frequency Response: 2.5 Hz - 7 kHz Exit Type / Connector: top, R6 type, 2 pin Max. Temperature: 120°C Mounting: 1/4-28
|
|