ALL-TEST PRO? 33 Industrial
Check and test your electric motors easily with the All-Test PRO AT33 Industrial
The AT33IND instrument is the PERFECT TOOL for troubleshooting,
inspection of incoming or stored motors before installation or repair
and shows the complete condition of the Stator Windings, the Rotor,
Contamination, Ground Fault and Connections.
This instrument presents an exciting break-through in off-line
(de-energized) testing. Within minutes the operator can get a complete
picture of the condition of the motor without having to stress-test the
windings or use other more expensive or elaborate instruments, which can
he difficult to operate and analyze captured data with.
The instrument can be used in two modes:
Static and Dynamic. Both quickly collect data in the auto mode and there
is no need to operate a lot of difficult to understand buttons.
No need to carry along hard to read user manuals!- How to proceed is shown step by step on the screen
- Virtually anybody who can read can do the testing and understand the results.
- Analyze results by viewing Bad, Warning or OK for Resistance, Stator, Rotor and Contamination.
- Developed for testing induction motors with squirrel cage rotor.
- The Dynamic Test is done with the rotor shaft disconnected to the machinery.
- It measures in real time, during the manual rotation of the shaft, several measurements.
- Any problem is easily recognized by even inexperienced operators.
AT33IND is supplied with the following:- (1) ALL-TEST PRO? 33 Industrial
- (3) Test Leads with custom Kelvin Clips
- (1) Test Lead with 4mm safety plug and MC Dolphin clip
- (1) Charging adapter
- (1) Hard carrying case
Accessories NOT included:
- Windows based software for test reporting and trending (Windows XP/7 compatible)
- USB Cable 1m
- Soft carrying pouch for instrument and test leads
Download Datasheet
