CMCP-261 Liquid Tight Strain Relief Connectors

Home > Vibration > BNC Junction and Switch Boxes >

The CMCP-261 Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into the junction boxes listed above. Long cable runs or cables other than the actual extension cable should be installed in conduit.

Constructed of Polyamide
Providing both:

Environmental sealing
-and-
Strain relief

Temperature rated to -40o to 212o F (-60o to 100o C).
Pressure rating of up to 150 PSIG.

Item#	Item Name	Starting at:	Qty	Add
CMCP-261-01	CMCP-261-01 0.08" to 2.0" (2 to 5 mm)	$10.00
CMCP-261-02	CMCP-261-02 0.20 to 0.35" (5 to 9 mm)	$10.00
CMCP-261-05	CMCP-261-05 0.35" to 0.70" (9 to 18 mm)	$20.00
Check the items you wish to purchase, then click

Browse for more products in the same category as this item:

Vibration > BNC Junction and Switch Boxes
STI
Vibration

	Extech 42530 Wide Range Infrared Thermometer with Alarm $89.99
	Extech PH103 pH Buffer Solution Tripak, 6 each or 4,7 and 10 pH + 2 Rinse Solutions $29.99
	SKF TMHN 7 series - Bearing lock nut spanner $1,184.12
	Extech 451126 CFM Vane Anemometer Datalogger $339.99
	Extech SW800 Software and Cable for MultiPro and MultiLog Series $49.99
	SKF LHRP 1/5 Anti corrosive agent $147.98
	ACC-SAT-2 - Shaft Alignment Trainer $2,650.00
	CMCP-525-100-02P Vibration Acceleration Transmitter - Peak Detection $445.00
	Wilcoxon 793-6 High Temperature Accelerometer $325.00