The CMCP1100 100 mv/g Accelerometer with 5, 10 or 20 Meter Integral Cable is manufactured in house to high quality standards. Each accelerometer is fully enclosed in a potted and waterproof stainless steel case. CMCP1100 accelerometers, in the three standard length cables, are always in stock ready for quick delivery. Other cable lengths and side exit models are custom made to fit your exact specifications. 1/4" x 28 UNF Mounting Stud included. An optional Female BNC Connector is available.

Data Sheet   Manual

Specifications:

Dynamic Performance	English	SI
Sensitivity (ñ10%)	100 mV/g	10.2 mV/(ms-2)
Measurement Range	ñ50 g	ñ500 ms-2
Frequency Range: (ñ3 dB)	0.32 to 10 kHz	0.32 to 10 kHz
Mounted Resonant Frequency	>25 kHz	>25 kHz
Amplitude Linearity	≤1%	≤1%
Transverse Sensitivity	≤5%	≤5%

 

Environmental	English	SI
Shock Limit	ñ7,000 g pk	ñ70000 ms-2 pk
Temperature Range	-65 to +185ø F	-54 to 85ø C

Electrical	English	SI
Settling Time	2.5 sec	2.5 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Excitation Constant Current	2 to 20 mA	2 to 20 mA
Output Impedance	<100 ohms	<100 ohms
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Electrical Case Isolation	>108 ohms	>108 ohms
Electrical Protection	RFI/ESD	RFI/ESD
Integral Cable	22 AWG , 221ø F	22 AWG, 105ø C

Spectral Noise
(1 Hz)	85 æg / √Hz	850 (æm/s-2) / √Hz
(10 Hz)	10 æg / √Hz	100 (æm/s-2) / √Hz
(100 Hz)	2.7 æg / √Hz	27 (æm/s-2) / √Hz
(1 kHz)	1 æg / √Hz	10 (æm/s-2) / √Hz

Mechanical	English	SI
Size	0.36" x 3.76"	9.14 x 9.55 mm
Weight (including 5 M cable)	2.5 oz	70.7 g
Mounting Thread	1/4-28 UNF-2B	1/4-28 UNF-2B
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 N-m
Sensing Element	Ceramic/Shear	Ceramic/Shear
Case Material	Stainless Steel	Stainless Steel
Sealing	Potted	Potted
Wrench Flats	7/16	7/16