Precision DC, mA, Voltage, Frequency Calibrator Combined with True RMS MultiMeter

• Calibrator Features:
  • Simultaneous source/simulate and measure on large dual display
  • Precision 0.03% accurate voltage and current calibration source
  • Constant current output for loads up to 1200Ohms
  • Bipolar current (±25mA) and voltage (±1.5V, ±15V) outputs
  • Simultaneously source 15V excitation voltage and measure mA output of 2-wire transmitters
  • % of scale readout for 4 to 20mA or 0 to 20mA
  • Wide range Frequency (square wave) source with adjustable amplitude, pulse width, and duty cycle
  • Programmable 16 continuous or timed step outputs, or 999 step ramp
  • Optional communications software allows you to remotely operate the CMM-17 from your PC and document readings
• DMM Features:
  • Measure DCmA, ACmA, DCV, ACV, AC+DC, Temperature, Frequency, Duty Cycle, Pulse Width, Resistance, Continuity, and Diode
  • 1uV or 1uA resolution and 0.03% basic DCV accuracy (400mV-40V)
  • 1ms Peak Hold for glitch capture, plus Data Hold, Auto Hold. relative and dynamic recording
  • True RMS measurement for non-linear voltage and current loads
• Common Features:
  • Built-in bi-directional RS-232 interface
  • Built-in NiMH rechargeable battery
  • Large 50,000 count backlit LCD displays primary, secondary, source/measure ranges and functions selected
  • Separate input/output banana jacks with fused protection
  • Auto power off with disable function
  • Complete kit with input/output test leads, Type K temperature probe, 8 NiMH rechargeable batteries, 100V-250V AC adaptor/recharger, and carrying case

Specifications - Ranges, Max Resolution, Accuracy (% output + digits):

• Source (Output)
  • DC Voltage: ±1.5/±15V, 100uV/1mV, ±(0.03% + 3)
  • DC Current: ±25mA, 1uA, ±(0.03% + 5) (Max load 1200Ohms)
  • Square Wave: 28 Frequencies, 0.01Hz, ±(0.005% + 1)
    • (0.5,1,2,5,10,15,20,25,30,40,50,60,75,80,100,120,150,200,240,300,400, 480,600,800,1200,1600,2400,4800 Hz)
  • Duty Cycle: 0.39% to 99.60%, 0.390625%, ±(0.01% + 0.02%)
  • Pulse Width: 1/frequency, Range/256, ±(0.01% + 0.3ms)
  • Amplitude: 5V, ±5V, 12V, ±12V; 0.1V; ±(2% + 0.2V)
• Measure (Input)
  • DC Voltage:
    • 50mV, 1uV, ±(0.05% + 50d)
    • 500mV, 5V, 50V; 10uV; ±(0.03% + 5d)
    • 250V, 10mV
  • AC Voltage (45-20kHz): 50,500mV, 5,50,250V; 1uV; ±(1.5% + 20d)
    • @50/60Hz
  • DC Current: 50mA, 500mA; 1uA; ±(0.3% + 5d)
  • AC Current (45Hz-2kHz): 50mA, 500mA; 1uA; ±(0.6% + 20d)
  • AC + DC Voltage: 50,500mV, 5,50,250V; 1uV; ±(0.8% + 25d) @50/60H
  • AC + DC Current: 50mA, 500mA; 1uA; ±(1.2% + 10d)
  • 1ms Peak Hold (Glitch capture):
    • 50,500mV, 5,50,250V; 1uV; ±(2% + 400d)
    • 50mA, 500mA; 1uA
  • Resistance:
    • 500,5k,50k,500k,5MOhms; 0.01Ohms; ±(0.15% + 5d)
    • 50MOhms; 1kOhms; ±(1% + 8d)
  • Temperature (Type K):
    • -40°F to 2502°F; 1/0.1°F; ±(0.3% + 6°F)
    • -40°C to 1372°C; 1/0.1°C; ±(0.3% + 3°C)
  • Frequency: 100Hz,1,10,100,200kHz; 0.001Hz; ±(0.02% + 3d)
  • Duty Cycle: 0.1-99.9% ±(0.3% per kHz +0.3%)FS
  • Pulse Width: 0.1-1999.9mS ±(0.2% + 3d)
  • Diode Check / Continuity:
    • 0.45mA @ <4.8V
    • Beeper < 10Ohm on 400Ohm range
• Dimensions/Weight: 2.1x3.54x7.56"(54x90x192mm) / 3.75lbs (1.71kg)