Features:
-
Housing is rated for dive depths up to 1000 ft (300 meters) with backlit display
-
Resolution of 0.001" (0.01 mm) with user-selected units of inch or mm
-
Includes built-in datalogger for 5000 readings, settings and waveforms in sequential or "grid" (row/column) format
-
Automatic probe recognition and auto zero
-
Supplied with FREE NIST-Traceable Calibration Certificate
-
Supplied with data transfer cable and FREE data analysis software
-
Measure modes include: Pulse-Echo, Pulse-Echo w/ Coating, Echo-Echo and Triple Echo
-
CE-certified with 3-Year Warranty (90 days on probe)
-
Measures BOTH Wall and Coating Thickness
-
Both Dual Element and Single Membrane Probes are offered
-
Standard Probe supplied is 1/2"-5MHz HD-Coating, Underwater p/n T-074-2906
-
All settings for gauge and datalogging can be done via software if desired
Measuring Range in Steel
0.025 - 19.99 inches
0.63 - 508.0 mm
The new CHECK-LINE TI-UMX2 Underwater Wall Thickness Gauge accurately measures the wall thickness of all metals, extent of corrosion and the thickness of coatings on them -- at depths of up to 1000 feet (300 Meters).
A back-lit LCD display and illuminated housing allow divers to easily read measurements in dark water.
An over-sized control button and clever menu structure allows easy gauge setup and navigation through menus above or below water even when wearing thick gloves.
The TI-UMX-2 can store up to 5000 readings including A-Scan Waveforms and settings for each individual measurement. There are 2 file structure options; sequential with auto identifier and alpha numeric grid (row/column) format. The UMX-2 can transfer data and configuration settings to a PC using our DataComm software. (Software and transfer cable included)
Velocity Settings
The TI-UMX2 has 8 preset velocities and 1 custom velocity allowing the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. The list of preset velocities are as follows:
1. Aluminum 2024
2. Stainless Steel 302
3. Steel4340
4. Iron
5. Cast Iron
6. PVC
7. Polystyrene
8. Polyurethane
9. Custom 1
Complete Kit:
 The TI-UMX2 is supplied as a complete kit with the gauge, Velcro wrist strap, 4 oz. bottle of coupling fluid, 3-AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable with USB converter and spare gasket & lube kit including Operating Instruction Manual - all in a foam-fitted carrying case.
|
Range in Steel |
Pulse-Echo Mode: (P-E) Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
Echo-Echo Mode (E-E): Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness of the coating.
Triple-Echo Mode (TCG): Thru Paint&Coatings) measures from 0.040 to 6.0 inches (1 to 150 millimeters) in steel. Range will vary based on coating thickness, material type, and probe. |
|
Resolution |
0.001" (0.01 mm) |
|
Velocity Range |
8 fixed and 1 programmable Material Velocities
0.0492 to 0.5510 in./æs (1250 to 13995 m/sec) |
|
PreSet Velocities |
1. Aluminum 2024 - 0.2510 in/æs
2. Steel 4340 - 0.2330 in/æs
3. Stainless Steel 302 - 0.2230 in/æs
4. Iron - 0.2320 in/æs
5. Cast Iron - 0.1800 in/æs
6. PVC - 0.0940 in/æs
7. Polystyrene - 0.0920 in/æs
8. Polyurethane- 0.0700 in/æs
9. Custom User Set |
|
Probe |
STANDARD: Underwater Type, 1/2"-5MHz Dual-Element HD-Coating Probe
OPTIONAL: Underwater Type, 1/2"-3.5MHz Dual-Element HD-Coating Probe
MEMBRANE: 1/2"-5MHz Single-Element Contact Type Probe
OTHER: Dual Element Type, 1 to 10 MHz frequency range. Custom auto recognition probes. Single Element Type: 1 to 10MHz frequency range. Inquire. |
|
Display |
4« - Digit, 0.5" Backlit LCD
(2nd Display for menus, 3/8" 6 character LCD |
|
Backlighting |
Both Displays can be user set for ON/OFF/AUTO |
|
Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
|
Connectors |
Lemo, Underwater Type |
|
Battery Type |
Three (3) 1.5V AA alkaline batteries (or 1.2V NiCad) |
|
Battery Life |
BACKLITE OFF, typical
50 hours on alkaline (15 hours on NiCad)
BACKLITE ON, typical
15 hours on alkaline (8 hours on Nicad) |
|
Accessories Included |
Velcro wrist strap, 4 oz. bottle of coupling fluid, AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable with USB converter and spare gasket & lube kit including Operating Instruction Manual - all in a foam-fitted carrying case |
|
Datalogger |
GRID or SEQUENTIAL data storage
Capacity: 5000 wall & coating readings, settings and waveform graphics |
|
Data Output |
Bi-directional RS232 serial port, with USB converter. Windows? PC interface software |
|
Operating Modes |
PE: Pulse-Echo
PECT: Pulse-Echo Coating
EE: Echo-Echo
EEE: Triple Echo TCG
(requires T-9441-2809 MEMBRANE Probe) |
|
Pulser |
Dual square wave pulsers |
|
Receiver |
Dual receivers - manual or AGC gain control with 110dB range (limited) |
|
Manual Gain |
Limited to 5 gain settings (vlow, low, med, high, vhigh (42 to 50 dB) |
|
Temp. Limits |
Ambient: -20 to 140ø F (-30 to 60ø C) |
|
Housing |
High strength transparent plastic
IP 68 Waterproof Rating
Depth Rating: 1000 feet (300 meters) |
|
Keypad |
Single button, magnetically coupled switch |
|
Size |
Length (9.0 in/229 mm)
Diameter (2.375 in/60.33 mm) |
|
Weight |
1.5 lbs (680g) - with 3 AA batteries |
|
Warranty |
Gauge: 3 Years
Probe: 90 Days |
|
Certification |
CE Approved, Factory calibration traceable to national standards |
|
