|
A truly portable unit, the Shimpo DT-315AEB Stroboscope operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. When fully charged, rechargeable batteries power the strobe for approximately four continuous hours. The DT-315AEB also incorporates the same impressive features as our DT-311A and DT-315A strobes. One year warranty. Not sure which sensor to use with your stroboscope? Use our sensor cross-reference.
Features and Benefits
-
Extruded aluminum construction Extraordinary durability yields long service life
-
External battery supply Lightweight; enables easy portability
-
Repeatable accuracy (± 0.01% of reading) Fully meets the strictest tolerances
-
Microprocessor-controlled Guarantees uncompromising performance in volatile temperature environments
-
Phase shift (in degrees of delay time) Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle
-
Flash timer control Prolongs flash tube life
-
Manual flash controller knob Permits easy/accurate adjustments to flash rate
-
External trigger Allows synchronization of the flash rate with the motion of the rotating machinery
-
Synchronous output Allows unit to power other strobes
-
Continuous duty cycle Eliminates downtime waiting for unit to cool
-
Highly polished focused reflector Prevents “blind” viewing areas
Specifications
-
Accuracy ±0.01 % of reading
-
Resolution
-
0.1 fpm: 40.0 - 5,000 fpm
-
0.2 FPM: 5,001 - 8,000 fpm
-
0.5 fpm: 8,001 - 10,000 FPM
-
1 fpm: 10,001 - 35,000 fpm
-
Phase Shift Use +/- push buttons (360° in 6 seconds)
-
Display Update Time 0.2 seconds approx.
-
Output Signal Synchronous, 400 ěsec. Pulse output, 0 to +12 VDC amplitude(approx.), 4.7 KŮ impedance
-
Rate Multiplier/Divider Multiply by 2, divide by 2 hing Range 0.0 to 35,000 fpm
-
External mode
-
Accuracy ±0.01 % ±1 digit
-
Phase Shift 0 to 359° with 1° resolution
-
Delay Time 0 to 2,000 mSec from 40 - 10,000 fpm
-
External Trigger
-
Input Impedance 4.7 KŮ to 12 V / 6.8 KŮ to 0 V
-
Display 5 digits, 0.4” (10 mm) high, LED h
-
Tube Xenon,
-
Flash Duration 10 - 40 ěsec
-
Sensor Power Supply 12 VDC (40 mA)
-
Low Battery Indicator Display shows all L’s
-
Battery Life 1 - 2 hours depending on flash rate
-
Power Requirement External battery pack (9.8 - 14.5 VDC, 2.3A)
-
Operating Temperature 32° - 104°F ( 0 - 40°C )
-
Wei ght 2.5 lb (1.1 kg)
-
Dimensions 7.28” L x 4.72” W x 4.72” H (185 mm x 120 mm x 120 mm)
-
Warranty 1 year
-
Standard Accessories External battery pack with charger
-
Optional Accessories Carrying case, sensors, SG-300 strobe guard
Option Descriptions
DT-315AEB: External Battery Powered Digital Stroboscope 115V
DT-315AEB-2: External Battery Powered Digital Stroboscope 230V
NISTCAL: NIST Calibration Certificate for Stroboscope
311FH: Spare flash tube for DT-300 Series Strobes
DT300CC: Carrying Case for DT-300 Series Strobes
SG-300: Protective Rubber Caps for DT-300 Series Strobes
SAS-DT300: Articulationg Swing Arm
BP-7AHR: Spare battery with Charger for DT-315AEB
|
