 |
 |
 |
|
The Shimpo DT-721 and DT-725 Digital Stroboscopes are highly stable, industrial-quality instruments for non-contact RPM measurement as well as for inspection and observation of moving parts by “freezing” or “slowing down” the action. A “Kit” option is offered for both models which also includes a carrying case and spare flash tube at minimal additional cost. External Trigger Operation: Suitable for applications requiring external control of the flash rate using a sensor or other input device. An external power source may be required.
 Features:
-
AC or battery-powered models
-
Highly accurate speed control with drift-free operation
-
Easy-to-use controls with bright LED display
-
Instant double (2x) and half-rate (÷2) flash selection
-
Accepts input from sensor for external flash triggering
-
Phase shift adjustment permits movement of objects to desired position for convenient observation  -
Extremely lightweight and rugged
Complete Kit:
Optional Complete Kit is offered for both models which also includes a carrying case and spare flash tube at minimal additional cost.
|
|
|
|
|
|
Flash Range: |
40.0 - 12,500 FPM |
|
Phase Shift: |
0 - 359° (Internal Mode) |
|
Accuracy: |
± 0.02% of reading |
|
Operating Time: |
1 hour (Model 725 only) |
|
Resolution: |
(0.1) 40.0 - 4,999.9 |
|
Charging Time: |
15 hours |
|
(0.2) 5,000.0 - 7,999.8 |
|
Low Battery Indicator: |
Model 725 only |
|
(0.5) 8,000.0 - 9,999.5 |
|
Operating Temperature: |
32 to 105° F (0 to 40° C) |
|
(1.0) 10,000.0 - 12,500.0 |
|
Weight |
|
Display: |
5-Digit LED, 8 mm high |
|
Model 721: |
1.50 lbs. (680 g) |
|
Flash Tube: |
Xenon, 10 watt |
|
Model 725: |
2.75 lbs. (1.25 Kg) |
|
Tube Life: |
100 million flashes |
|
Power Requirements |
|
Flash Duration: |
10 - 15 µs |
|
Model 721: |
115 VAC ± 10%, 50/60 Hz |
|
Signal Output: |
NPN Open Collector, 24 VDC max. at 50 mA (150 µs typical) |
|
Model 725: |
Internal battery (Lead Acid Rechargeable) |
|
External Trigger Input Signal: |
|
|
a) 12 - 24 V DC through a 3-wire NPN sensor (requires external power supply) |
|
|
b) 12 V DC through a 2-wire proximity sensor (Leakage Current 1 mA max. Load current 8 mA min.) |
|
|
c) Switch or Relay Contact |
Kit Descriptions
ELE-DT-725: DT-725 Stroboscope 115VAC Charger
ELE-DT-725-2: DT-725-2 Stroboscope 230VAC Charger
ELE-DT-725-Kit: DT-725 Stroboscope, 115VAC Charger, Carrying Case and Spare Flash Tube
ELE-DT-725-2-Kit: DT-725-2 Stroboscope, 230VAC Charger, Carrying Case and Spare Flash Tube
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
