Newly redesigned, and now manufactured in Germany to the highest quality standards, the PK2X portable, digital stroboscope delivers superior performance and incorporates impressive new features, while remaining among the world’s smallest industrial stroboscopes—all at a new lower price. 
Performance enhancing features include a flash brightness of 800 Lux (300% brighter than PK1), a flash rate of up to 12,500 flashes per minute and a longer-lasting flash tube. The PK2X is lighter than the PK1 and has a Lithium Ion battery that provides a full 2 hours of continuous operating time regardless of flash rate. The PK2X is CE-certified, so it meets the industry’s toughest safety and performance standards. It provides highly accurate speed control with drift-free operation, a resolution of ±1 RPM over the entire range, and external triggering capability.
Small enough to be operated with one hand, the PK2X performs comparably to larger and heavier “pistol grip” type models. It fits easily in the pocket or can be carried in an optional belt holster. The PK2X is ideal for non-contact RPM measurement, as well as for inspecting moving parts by “freezing” or “slowing down” the action. The PK2X is supplied as a complete kit that includes the strobe, universal (100–240 VAC) battery charger, free NIST-traceable calibration certificate and hard-plastic carrying case. A signal output for connection to vibration and machine condition analyzers is also available.
 Approved
|
FLASH TUBE PARAMETERS |
|
Longevity |
100,000,000 flashes |
|
Flash Energy |
150 mJ maximum |
|
Flash Duration |
<20 microseconds |
|
Flash Brightness |
1200 Lux |
|
DISPLAY PARAMETERS |
|
Numerical Display |
5 Digit LCD |
|
Range |
30 to 12,500 FPM |
|
Resolution |
± 1 FPM over the entire range |
|
Accuracy |
± 0.01% of reading over the entire range |
|
Display Update Time |
0.5 seconds |
|
ELECTRICAL SPECIFICATIONS |
|
Power Switch |
Off/Low/High mechanical switch |
|
External Trigger |
0-5 Volt DTL/TTL compatible 1/8" standard jack |
|
Line Power Input
(for recharging) |
100 - 240 V, 50/60 Hz |
|
Continuous Use Time |
2 Hours |
|
Internal Battery |
Lithium Ion |
|
Battery Recharge Time |
2-3 hours, typical |
|
Battery Overcharge Protection |
Yes |
|
Low Battery Indicator |
Yes |
|
MECHANICAL SPECIFICATIONS |
|
Dimensions |
9.75" x 2.75" x 1.75" (2.5" at reflector) |
|
Construction |
High impact ABS plastic |
|
Reflector Material |
Polished aluminum |
|
Tri-Pod Mount |
¼ 20 female insert |
|
Unit Weight |
0.9 pounds (415 grams) |
|
Operating/Storage Environment |
32 – 104°F / 0 – 40ºC |
|
The Pocket-Strobe is designed to meet UL, CSA and IEC safety guidelines. Its calibration procedures are traceable to N.I.S.T. |
Options:
ELE-PK2X: Stroboscope, battery charger, external triggering jack, NIST-traceable calibration certificate and instruction manual and hard shell carrying case.
ELE-PK2X-OT: Stroboscope, battery charger, jack, external triggering jack, output signal, NIST-traceable calibration certificate and instruction manual and hard shell carrying case.
ELE-PK2X-AC: Includes Strobe without battery for operation on AC-Power ONLY. Includes Universal AC-Adapter, External Trigger Jack in carrying case with Traceable Calibration Certificate.
ELE-PK2X-TBE: Spare Xenon Flash Tube
ELE-PK2-HLT:Padded-vinyl & leather belt-clip holster
ELE-PK2-PHONO: Connection jack for external trigger input signal
ELE-PK2-TRI: Telescoping tripod
ELE-PK2-BNC: External triggering cable; 6 ft. long; 1/8" male to BNC male connections
ELE-PK2-8M: External triggering cable; 6 ft. long; 1/8" male to 1/8" male connections
ELE-PK2X-BAT: Replacement Lithium Battery Pack. Requires minor soldering for replacement
ELE-PK2X-AC-BC: Replacement Universal AC Adapter/Charger for PK2X abd PK2-AC (100-240 VAC, Worldwide use)
ELE-PK2-FUSE: Fuse Cable. Fuse incorporated into replaceable wiring harness.
| 
