|
PosiTest®
Magnetic pull-off thickness gage for the Non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.
ACCURACY
· Highly wear resistant Carbide Probe for longest life and continuous accuracy
· Modern and up-to-date gauge Scale Ranges fit all applications
· Conforms to national and international standards including ISO and ASTM.
DURABILITY
· Extra rugged gauge housing, not affected by mechanical shock, water, acid or solvents
· Unique overall gage design, fully supported, positive positioning, no pivoting tendencies during measurement
· Gage can be used fully supported or with only the front probe area contacting the surface
· Functions on a permanent rare-earth cobalt magnet, no battery
· Explosion Proof - Refinery safe
· 2 year warrantyEasy To Use
 · Positive visual and audible indicators to designate when thickness reading is established
· "V" grooves in probe housing and Gauge base allow correct positioning on cylindrical objects
· Compact, lightweight, precisely balanced, Independent of gravity - Gauge can be used in any position
· GO / NO-GO button can be pre-set for rapid measurement
· Probe contact and dial rotation all in a one-finger operation
· Gauge is furnished with wrist strap, neck strap and instructions in a high quality leather case with belt loops for your convenience
Features
For Hot dip galvanizing,hard chrom metalizing,paint,enamel,plastic coatings on steel
Scale FM: 0-80mils
Tolerance: +/-0.2 mils up to 4 mils +/-5% of the reading over 4 mils
For Electroplating, thin paint fims, phosphating on steel
Scale GM: 0-8 mils
Tolerance: +/-0.04 mils up to 0.8 mils
+/-5% of the reading over 0.8 mils
Scale F: 0-2000µm
Tolerance: +/-5µm up to 100µm
+/-5% of the reading over 100µm
Scale G: 0-200µm
Tolerance: +/-1µm up to 20µm
+/-5% of the reading over 20µm
DOWNLOAD DATASHEET
|
