| |
SKF TMDT 2-30 Standard surface probe
 |
For hard surfaces such as bearings, bearing housings, engine blocks, oven shields, etc.
- Tolerance: 900 °C (1,650°F )
- Response: 2.3 sec.
|
SKF TMDT 2-31 Magnetic surface probe
 |
For hard, magnetic surfaces; the integral heat sink design and the low mass minimise thermal inertia and provide an accurate temperature measurement.
- Tolerance: 240°C (460°F)
- Response: 7.0 sec.
|
SKF TMDT 2-32 Insulated surface probe
 |
For hard surfaces where electrical wiring might cause short circuiting, e.g. electric motors, transformers, etc.
- Tolerance: 200°C (390°F)
- Response: 5.5 sec.
|
SKF TMDT 2-33 Right angle surface probe
 |
For hard surfaces in heavy duty applications, e.g. machine components, engines, etc.
- Tolerance: 450°C (840°F)
- Response: 8.0 sec.
|
SKF TMDT 2-34 Gas and liquid probe
 |
Flexible shank made of stainless steel, for liquids, oils, acids, etc. and at high temperature, e.g. open fire (not for molten aluminium).
- Tolerance: 1,100°C (2,010°F)
- Response: 12.0 sec.
|
SKF TMDT 2-34/1.5 Gas and liquid probe
 |
Same as TMDT 2-34, but with thin shank and faster response time. Very flexible, specially suitable for measuring temperature of gases.
- Tolerance: 900°C (1,650°F)
- Response: 6.0 sec.
|
SKF TMDT 2-35 Probe with sharp tip
 |
Can be easily inserted into semi-solid materials like food-stuffs, meat, plastic, asphalt, deep-frozen products, etc.
- Tolerance: 600°C (1,110°F)
- Response: 12.0 sec.
|
SKF TMDT 2-35/1.5 Probe with sharp tip
|
Same as TMDT 2-35, but with thinner shank and faster response time for insertion into soft solids.
- Tolerance: 600°C (1,110°F)
- Response: 6.0 sec.
|
SKF TMDT 2-36 Pipe clamp probe
 |
For temperature measuring on pipes, cables, etc. Diameter up to ø 35 mm (1.4 in).
- Tolerance: 200°C (390°F)
- Response: 8.0 sec.
|
| SKF TMDT 2-37 Extension cable |
 |
For use with all K-types probes.
Special lengths are available on request. |
SKF TMDT 2-38 Wire probe
 |
Thin, light weight, very fast response, fiberglass insulated.
- Tolerance: 300°C (570°F)
- Response: 5.0 sec.
|
SKF TMDT 2-39 High temperature wire probe
 |
Thin, light weight, very fast response, ceramic insulation.
- Tolerance: 1,350°C (2,460°F)
- Response: 6.0 sec.
|
SKF TMDT 2-40 Rotating probe
 |
For moving or rotating, smooth surfaces.
Four roller bearings provide suitable contact with the surfaces.
- Max. velocity: 500 m/min.
- Tolerance: 200°C (390°F)
- Response: 0.6 sec.
|
SKF TMDT 2-41 Non-ferrous foundry probe
 |
Holder includes dip-element for molten, non-ferrous metals.
Highly resistant to corrosion and oxidation at high temperatures.
- Tolerance: 1.260°C (2,300°F)
- Response: 30 sec
|
SKF TMDT 2-41A Dip-element
 |
Replacement dip-element for TMDT 2-41.
- Tolerance: 1,260°C (2,300°F )
- Response: 30 sec
|
SKF TMDT 2-42 Ambient temperature probe
 |
For measurement of ambient temperature |
