|
Dwyer TAC Series
|
|
Dwyer EC Series Conductivity Tester
|
|
Dwyer 920 Smoke Gage Kit
|
|
|
|
Our Price: $72.05
|
|
|
|
Our Price: $105.05
|
|
|
|
|
|
|
Take non-contact, contact and linear speed measurements of saw blades, grinders, engines, motors and conveyor belts with the versatile Series TAC Pocket Tachometer.
- Unique ergonomic design provides direct line-of-sight viewing of display and target.
- Model TAC1 is designed to make non-contact measurements of rotational speeds or contact measurements when equipped with the optional TAC1-1 Contact Tip Assembly.
- Model TAC2K is a 30 function tachometer, totalizer/counter and timer.
|
Conductivity Tester Waterproof, ±1% FS Accuracy, Large Easy to Read Display
- Ideal for conductivity measurements in the lab, industrial plant or out in the field.
- Measures conductivity from 0 to 1990 microohms (μS) or 0 to 19.90 milliohms (mS).
- Glass reinforced thermoplastic polyester housing and 316 SS electrodes withstand most chemicals.
|
Easy-to-Use Smoke Gage Kit enables you to quickly balance maximum CO2 with minimum smoke for clean, efficient combustion.
Simply take an actual sample of the smoke being tested and compare it to the standards on the Smoke Chart included. Just 10 full strokes of the pump produces an accurate test sample. Complete testing instructions are included.
|
|
|
|
Dwyer CA10 Thermocouple Calibrator
|
|
Dwyer CA20 Thermocouple Calibrator
|
|
Dwyer RLD1 Refrigerant Leak Detector
|
|
Our Price: $180.40
|
|
|
|
Our Price: $180.40
|
|
|
|
Our Price: $224.40
|
|
|
|
|
|
|
Dual function CA10 Thermocouple Calibrator can be used to source Type K thermocouple output values or measure Type K thermocouples
- Quickly select output value using the rotary switch with coarse and fine adjustments
- Accepts up to two Type K thermocouples and features data hold and max functions
- Measurements are displayed on a 3-1/2 digit backlit display
|
Dual function CA20 Thermocouple Calibrator can be used to source Type J thermocouple output values or measure Type J thermocouples.
- Select output value using the rotary switch with coarse and fine adjustments.
- Accepts up to two Type J thermocouples.
- Features data hold and max functions.
|
Detect and pinpoint even small leaks of refrigerant gases using the Model RLD1 Refrigerant Leak Detector.
- Effective in detecting existing refrigerants including HFC, HCFC, CFC, SF6, R134a, and R123.
- Unit features thumbwheel operation to increase sensitivity and audio and visual indication.
- The flexible gooseneck probe is ideal for hard to reach areas.
|
|
|
|
Dwyer UPT1000 Digital Hand-Held Universal Thermocouple-Process Indicator
|
|
Dwyer 400 Series Air Velocity Meter
|
|
Dwyer 1200-B Combustion Test Kit with Dwyer® Magnehelic® Dial Gage
|
|
Our Price: $260.70
|
|
|
|
|
Our Price: $693.00
|
|
|
|
|
|
|
Digital Hand-Held Universal T/C - Process Indicator Microprocessor Based, Programmable Resolution
The UPT1000 Digital Hand-Held Universal Thermocouple - Process Indicator is a microprocessor based precisiongeneral-purpose thermometer and process indicator designed for use with a multitude of standard inputs. These inputs include Type J, K, T, E, R, S, B, and N Thermocouples as well as 100 ohm 2 or 3-wire Platinum RTDs, 120 ohm Nickel RTDs, and 1000 ohm Platinum 2 wire RTDs.
|
Measure both pressure and air velocity
Read the red figures directly in feet per minute of velocity — from 400 to 10,000 f.p.m. No conversion tables needed for air at standard conditions. Read the black figures in inches of water column air pressure — from 0 to 10" w.c.
|
Quick and Easy-to-Use Dwyer® Combustion Test Kit.
Measure all four factors that govern overall efficiency: CO2 content, draft, stack temperature and smoke. Accuracy to ±1/2%CO2 fully meets the requirements of the professional Heating Engineer. Yet an apprentice can follow the simple, illustrated step-by-step instructions. Add a small pitot tube, which will fit into the kit case, for air velocity measurements.
|
|
|
