 |
 |
 |
 |
The TI-25LT Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion - from only one side!
Standard configuration: In its standard configuration, the TI-25LT is factory set to measure steel only
Optional configuration: As a "no cost" option, the TI-25LT can be factory set to measure on any other single material instead of steel.
Easy upgrade to full TI-25M functionality (refer to separate data sheet). TI-25M measures on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area. The minimum reading recorded during the "scan" is displayed.
Features:
-
Resolution of 0.004 inch (0.01 mm)
-
Large, backlit LCD display retains last reading
-
Simple operator controls virtually eliminate training
-
Special-purpose probes are offered for a variety of applications
-
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
-
Switch-selected units for inches or mm
-
For underwater surveying, probe cable lengths up to 50 feet are optionally
-
The TI-25LT probe is waterproof and can be submerged in water
-
CE Certified
-
Includes NIST Calibration Certificate
Supplied as a Complete Kit including: 
-
Measuring Range in Steel: 0.040 - 6.00 inches 1.00 - 150.0 mm
-
Range in Steel: 0.040-6.00" (1.00-150.0 mm)
-
Resolution: .004" (0.01mm)
-
Display: 4½ - Digit, 0.5" Backlit LCD
-
Velocity Range: .0787-.3937 in/µs (2000-10,000 m/sec)
-
Probe: T-102-2000 - 1/4", 5 MHz, actual wearface is 5/8" (17mm)
-
Probe Wearface: PEEK (Polyethylethylkytone)
-
Cable: 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors
-
Temp. Limits:
-
Ambient: -20 to 120° F (-30 to 50° C)
-
Material: 0 to 200° F (-20 to 100° C)
-
Special high temperature probes are optionally available
-
Battery Type: Two AA batteries
-
Battery Life: 200 hours
-
Weight: 710 ounces (280g)
-
Dimensions: 2.5 x 4..5 x 1.25" (64 x 114 x 32mm)
-
Included Accessories:
-
Probe/cable assembly,
-
4 oz. bottle of coupling fluid,
-
NIST Calibration Certificate,
-
2 AA batteries,
-
Operating instructions,
-
Hard-plastic carrying case.
-
Warranty
-
Gauge: 5 Years
-
Probes: 90 Days
-
LIMITS
-
Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
-
Minimum Radius for Concave Surfaces 3" (76.2 mm)
-
Minimum Headroom 1" (25.0 mm)
-
Minimum Sample Diameter 0.150" (3.8 mm)
-
Minimum Substrate Thickness - F na
-
Minimum Substrate Thickness - NFe na
|
|
 |
 |
 |
 |
|
 |

| Accessories for this product... |
|
|
|

|