EasyTherm 15 High Power Induction Bearing Heater

Home > Bearing Tools > Bearing Heaters >

handles bearing assemblies up to 150kg with dimensions up to 815x210mm

The EASYTHERM 15 is a 12.8 kW induction heater used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. The pivoting side-arm yoke is made to reduce the risk of damage and contamination, while increasing efficiency by ease of use and the "Turbo Boost" feature. This unit can handle bearing assemblies, and other parts, as small as 30mm inner ring to 150 kg with the appropriate configuration. A microprocessor controller allows the user to specify a temperature with accuracy of 2 degrees celcius or use a timer, perfect to .01 seconds . All this, and a 3 year warranty, makes the EasyTherm 15 Induction Heater, an ideal choice for bearing housing installations.

�TURBO-BOOST� - In the horizontal position the part will heat up twice as fast.

The pivoting yoke has the great advantage that only the work piece is handled, because the arm does not have to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding into the bearing or work piece.

Size induction yokes mm	Minimum Bore	Maximum Outer Diameter	Maximum Width	Maximum Outer Diameter with adapter yoke 70x70x150	Maximum Width with adapter yoke 70x70x150
20x20x350 pivoting	30mm	460mm	210mm	760mm	210mm
30x30x350 pivoting	45mm	475mm	210mm	775mm	210mm
40x40x350 pivoting	55mm	485mm	210mm	785mm	210mm
50x50x350 pivoting	70mm	500mm	210mm	800mm	210mm
70x70x350 pivoting	100mm	515mm	210mm	815mm	210mm
60x60x350 pivoting	85mm	515mm	210mm	815mm	210mm

Advantages of TM Easy therm induction heaters:

Fast controllable heating process.
Safe heating process; only the work piece is heated.
Elimination of hot oil bath, no risk of localized overheating.
Suitable for sealed and shielded bearings.
Suitable for pre-greased bearings.
Suitable for bearings with polyamide cages.

Technical advantages of TM Easy therm induction heaters:

Manufactured according to the CE Regulations.
Fast heating process through high output; Cos phi > 0.8.
The heating coil is placed horizontal under the part;
- By this it is impossible to damage the coil
- This ensures an equal temperature all over the part (inner- and outer ring).
- This makes it able to heat up parts with smaller bores.
All heaters are continuously useable without any optional cooling system.
Constantly monitoring heating process by probe and microprocessor.
Temperature control accuracy +/- 2�C.
Timer accuracy 0.01 sec.
Maintenance free.
Three years warranty.
Easy to use; user friendly design.
Ergonomic design (pivoting yoke principle).
Automatic power regulation, no manual pre-setting necessary.
Less than 2A/cm residual magnetism.

Voltage: 380-480V
Frequency: 50/60Hz
Power: 12.8kVA
Max. Temp.: 240/400�C
Weight of heater: 51kG
Dimensions of heater (lxbxh): 505x260x240

Width U-core: 210mm
Height U-core: 215mm

Induction yokes(mm): 23/30/40/50/60/70 (individually purchased)
Max.diameter of work piece: 560mm
Max. width of Work piece: 210mm
Max. weight of Work piece: up to 150kg (depending on Yoke)

Item#	Item Name	Starts at	Qty	Add
TMI-EASYTHERM-15	EasyTherm 15 High Power Induction Bearing Heater	$4,160.00
TMI-Swivel Yoke 20x20x350mm	Swivel Yoke 20x20x350mm	$305.00
TMI-Swivel Yoke 30x30x350mm	Swivel Yoke 30x30x350mm	$306.00
TMI-Swivel Yoke 40x40x350mm	Swivel Yoke 40x40x350mm	$337.00
TMI-Swivel Yoke 50x50x350mm	Swivel Yoke 50x50x350mm	$375.00
TMI-Swivel Yoke 60x60x350mm	Swivel Yoke 60x60x350mm	$422.00
TMI-Swivel Yoke 70x70x350mm	Swivel Yoke 70x70x350mm	$510.00
Check the items you wish to purchase, then click

Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item:

Bearing Tools > Bearing Heaters
Bearing Tools