• Contact AC Voltage from 70 to 250VAC
• Non-contact AC Voltage from 70 to 600VAC
• Continuity Check from 0 to 5M Ohms
• Self Test insures proper battery installation and bettery life
• Dimensions: 5.6x0.6x0.6" (142.2x15.2x15.2mm)
• Weight: 0.7oz (19.8g)
• Complete with two button batteries

Features:

• Non-Contact Detection of AC Voltage from 100VAC to 600VAC
• For use on 50/60Hz circuits
• Tip fits into outlets or against wire insulation
• Flashing red LED light and push button ON/OFF
• Audible beeper indicator
• UL and CE approved; CAT III-600V

Non-Contact Detection of AC Voltage With Built-In Flashlight

• Non-Contact Detection of AC Voltage from 100VAC to 600VAC
• Rugged, double molded case
• Suitable for outlets or against wire insulation testing
• Red LED light indicator
• Built-in bright flashlight with ON/OFF button

Adjustable AC Voltage Detector Features:

• Non-Contact detection of AC Voltage from 12VAC to 600VAC
• Sensitivity adjustment increases or reduces sensor trigger threshold
• Audible and visible voltage indication
• Self test function
• UL and CE approved; CAT III-600V

• Non-contact AC Current range is from 200mA to 1000A
• Locates current flow even where voltage detectors cannot work
• Detects through shielded wires, conduit, and metal circuit breaker or junction boxes
• Sensitivity adjustment for locating wires/conduit through walls
• Audible and visible indication

Non-Contact AC Voltage and Current Detector Features:

• The only two-in-one current/voltage detector designed for electrical testing
• Non-Contact AC Voltage detection from 12V to 600VAC
• Non-Contact AC Current detection from 200mA to 1000A
• Sensitivity adjustments to increase or reduce sensor trigger threshold
• Current sensor detects current flow through shielded wires, conduit, and metal circuit breaker/junction boxes

Convenient Compact Size Clamp Meter with Built-In AC Voltage Detector

• 3-1/2 digit (2000 count) backlit LCD display
• Measures AC Current up to 200A with 100mA resolution
• 2% basic ACA accuracy
• 0.9" (23mm) jaw opening
• Built-in non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip plus flashlight

• LED AC/DC voltage indication:
• AC: 24, 48, 120, 208, 240, 277, 480, 600
• DC: 6, 12, 24, 36, 48, 110, 220, 400
• Polarity detection with LEDs for positive and negative
• DC Continuity Test with audible tone
• Two handed operation for low impedance testing
• Built-in flashlight for testing in tight areas
• Voltage function operates without battery
• Rubberized double-molded IP64 housing

• Large backlit LCD display
• LCD AC/DC voltage indication: 6V, 12V, 24V, 50V, 230V, 400V, 690V
• Polarity detection with LEDs for positive and negative
• DC Continuity Test with audible tone
• Two handed operation for low impedance testing
• Built-in flashlight for testing in tight areas
• Voltage function operates without battery
• Rubberized double-molded IP64 housing