The MT series is comprised of four different gauges offering different possibilities of processing of measuring values. MT-4100 offers unique possibilities of data processing. In total, 10,000 measuring values can be stored in max. 99 application memories each with max. 98 batches. Application memories are extremely useful when different measuring tasks requiring different calibrations or probes occur regularly. The selected memory stores the calibration carried out and the probe used. Once MT-4100 is prepared for various measuring tasks, taking a series of readings becomes simple and quick. Permanent calibration can be dispensed with and measuring errors are abolished.
Probe
Model |
Type |
Range |
Accuracy |
Resolution |
|
F20 |
Ferrous |
0-800 mils
(0 - 20mm) |
±1% ±.4 mils
(±1% ±10µm) |
4 mils
(10µm) |
|
F50 |
Ferrous |
0-2000 mils
(0-50mm) |
±3% ±2 mils
(±3% ±50µm) |
4 mils
(10µm) |
|
N20 |
Non-Ferrous |
0-800 mils
(0 - 20mm) |
±1% ±2 mils
(±1% ±50µm) |
4 mils
(10µm) |
|
N100 |
Non-Ferrous |
0-4000 mils
(0-100mm) |
±1% ±12 mils
(±1% ±.3mm) |
40 mils
(100µm) |
Probe
Model |
Min. Radius
Curvature |
Min. Area for
Measurement |
Min. Substrate
Thickness |
Dimensions |
| F20 |
.4" / 1.2"
(10 mm / 30 mm) |
Ø 1.6"
(Ø 40 mm) |
.08"
(2 mm) |
Ø 1.57"
x 2.6"
(Ø 40 x 65mm) |
| F50 |
2" / 8"
(50 mm / 200 mm) |
Ø 12"
(Ø 300 mm) |
.08"
(2 mm) |
Ø 1.77"
x 2.75"
(Ø 45 x 70mm) |
| N20 |
1" / 4"
(25 mm / 100 mm) |
Ø 2.75"
(Ø 70 mm) |
.002"
(50 µm) |
Ø 2.6"
x 2.95"
(Ø 65 x 75mm) |
| N100 |
4" / Flat
(100mm / Flat) |
Ø 8"
(Ø 200 mm) |
.002"
(50 µm) |
Ø 4.97"
x 6.1"
(Ø 126 x 155mm) |
F = Ferrous (Magnetic Steel)
N = Non-Ferrous (Non Magnetic Metals,
aluminum, copper...) |
Different probes are available which can be connected to all gauges. In order to select the ideal probe for your application, the thickness of the coating to be measured as well as that of the substrate and the geometry have to be taken into consideration. For measurements on steel, the magnetic induction principle is used allowing measurement of all insulating coatings, e.g. paint, enamel etc., and non-ferrous metals on steel and ferrous metals. Probes working on the magnetic induction principle are referred to as F-probes. For measurements of insulating coatings on non-ferrous metals, the eddy current principle is used. Probes working on this principle are referred to as N-probes.
Power Supply 1 9V battery or AC adapter (included)
Battery Life 10,000 Measurements
Temperature Limits
Gauge: 32 - 122 °F (0 - 50° C)
Probe: 14 - 158 °F (–10 - 70° C),
Up to 250 °F (120°C) for quick measurements
Dimensions 5.9" x 3.23" x 1.38" (150 mm x 82 mm x 35 mm)
Weight 0.6 lbs (270 g)
The MT-4100 is supplied as a complete kit including gauge, bare metal test plate, test shims / blocks, calibration certificate and instruction manual in a foam fitted plastic carrying case.
