|
Pen Style Combustible Gas Leak Detector
|
|
Extech FG100 Combustible Gas Leak Detector
|
|
Extech EZ40 EzFlex™ Combustible Gas Detector
|
|
Our Price: $59.95
|
|
|
|
Our Price: $64.99
|
|
|
|
Our Price: $119.99
|
|
|
|
|
|
|
No furnace installation or service work should be performed without doing a gas leak test. Check all pipes, fittings, and valves for gas leaks, if any leaks are found they should be repaired or replaced. The 725 detects combustible gasses including natural gas, methane, propane(LPG), gasoline, diesel, and kerosene.
- Trace natural gas lines and fittings for leaks
- Check gas applications for leaks
- Check propane tanks, fitting lines, and heaters for leaks
- Check gas generators for fuel leaks
- Test confined spaces for gas build-up
|
Fast Response Detection of Gas Leakage
- Detects combustible gases - Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm
- Highly sensitive detection circuitry
- Audible and visual alarm
- Continuous operation up to 4 hours
- LED indicators for gas leakage and static absorption
|
Quickly Identifies and Pinpoints gas leaks
- 16" (406mm) gooseneck for easy access into hard to reach locations
- Visible and audible alarm at 10%
- Locate the smallest leaks
|
|
|
|
Reliability Direct AR5750A Rechargeable Refrigerant Gas Leak Detector
|
|
TPI-A771 Carbon Monoxide Adapter
|
|
TPI-720b Combustible Gas Leak Detector
|
|
Our Price: $129.00
|
|
|
|
Our Price: $129.95
|
|
|
|
Our Price: $149.95
|
|
|
|
|
|
Responds to all halogenated refrigerants
- Complete with NiCad batteries and Charger
- Instantaneously Alerts when gas is present
- Great for Detecting AC Leaks
- LED Array Displays Gas Concentrations
|
The A771 is a CO adapter designed to work with your DMM to measure ambient air CO. Can also be used as a personal CO alarm.
- Built-in Alarm is preset to 30ppm. Setting can be set by user.
- Use with any DMM with minimum 2 1/2 digit LCD, 2 or 4 Volt DC range and 10M Ohm or greater input impedance.
- Detect CO levels from 0-1999 ppm, with resolution as low as 0.1 ppm and ±5% of reading accuracy.
- Soft pouch included.
|
No furnace installation or service work should be performed without doing a gas leak test. Check all pipes, fittings, and valves for gas leaks. If any leaks are found they should be repaired or replaced. Easily operate the 720 with one hand while detecting the presence of combustible gases. Pinpoint leak sources with its audible and visual indicators. An adjustable “tic” rate helps eliminate background gas concentration in contaminated environments.
- Instant response
- 10 ppm sensitivity
- Adjustable tic rate
- One-hand operation
- Visual and audible leak indication
- 16'' gooseneck
- Soft carrying pouch
|
|
|
|
Inficon GAS-Mate Combustible Gas Leak Detector
|
|
TPI-770 Ambient CO Monitor
|
|
TPI-HXG-2 Combustible Gas Leak Detector
|
|
|
|
Our Price: $199.95
|
|
|
|
Our Price: $269.95
|
|
|
|
|
|
|
Superior Quality, High Sensitivity and Low Price
GAS-Mate uses leading-edge technology to detect hydrocarbons and other gases with twice the sensitivity of competing models. Perfect for checking leaks in residential and commercial combustion appliances, such as natural gas- or propane-fired heating systems, or gas pipelines.
Features:
- Propane, butane, cyclopentane, ethane, ethanol, isobutane, and ammonia.
- Adjustable sensitivity helps pinpoint leaks fast.
- Variable audio alarm and flashing LED indicate leak strength.
|
The 770 is a state-of-the-art carbon monoxide instrument designed to measure CO in ambient air. This palm-sized unit displays readings in 1 ppm increments.
- Measure CO from 0 to 999 PPM
- Displays the max. CO reading in PPM since power on
- Displays, in hours and minutes, time elapsed since power on
- Displays user set value of audible and visual alarm
- Audible alarm can be switched on or off by pressing SEL button
|
No furnace installation or service work should be performed without doing a gas leak test. Check all pipes, fittings, and valves for gas leaks, if any leaks are found they should be repaired or replaced. As lightweight and portable as it is sensitive, the HXG2 helps you pinpoint the smallest leaks quickly and accurately. Its calibrated alarm will indicate dangerous concentrations of combustible gases. Use with Hetkit and AGA approved protocol to test for cracked heat exchanges.
- UL 913 intrinsically safe
- Calibrated to NIS traceable standards
- Instant response
- 10 ppm sensitivity
- Adjustable tic rate
- Settable alarm
- Visual and audible leak indication
- 16'' gooseneck
- Hard carrying case
|
|
|
