Includes the following:
- Two Test Leads
- Two Banana to BNC Adapters
- One DC-60 MHz x 1 x 10 Passive Oscilloscope Probe
- Power Supply and Instruction Manual
-20 MHz Bandwidth
Capture signals from AC/DC drive motors, sensors, actuators, line and control voltages, UPS and industrial machines.
Measure the width and amplitude of the signal and display it on the screen instead of trying to figure it out manually.
Accurately measure sound signals.
-Pre and Post Triggering
View the waveform before and after the point the scope triggers at to find glitches and other anomalies with the signal.
Graph readings over a predetermined time period to check for surges or dropouts.
View two waveforms on the display for comparison and troubleshooting.
-True RMS DMM
Measure AC/DC volts up to 600V, frequency to 20 MHz, and resistance to 20 Meg ohm. Obtain accurate measurements of non-sinusoidal AC voltage and current waveforms found in controls and circuits with True RMS.
-Real Time Sample Rate
Capture spikes and dropouts of industrial signals with real time sampling of 25 mega samples per second.
-Bright LCD Backlight
Adjust brightness levels for clarity in any light condition. Optically Isolated RS232 Output Transfer data safely without a direct connection to your computer's circuitry.
Feature automatically determines the correct vertical and horizontal settings for optimum waveform viewing. Autoset provides hands free operation while moving between test points.
-Industrial motor control
View start-up in rush currents, waveform symmetry, SCR trigger pulses, variable frequency drive signals, pulse width modulation, noise, misc. AC/DC speed control signals.
Noise on industrial feeds, AC voltage waveshape, current waveforms, machine start-up/power quality interference and noise.
-Programmable logic controls
PLC input and output signals, control signals, signal conditioning circuits, communications lines and power supplies.
Power quality, sensor outputs, control circuits, safety circuits, calibration and adjustments.
-Uninterruptable power supplies
Sensing and monitoring circuits, switching circuits, output waveforms and current waveforms.
Public address feeds, amplifiers, mixers and preamps.
Horizontal and vertical scan rates, z-axis blanking, sync pulses and luminance. Industrial lighting controls SCR and other solid state designs.
Robot control signals, machine vision, machine control and sensing circuits, calibration of positioning systems, analog controllers and servo controls.
Noise and quality.
Noise and stability.
- Bandwidth: 20 MHz w/SP60B 10:1 Probe 10 MHz w/Shielded Test Leads
- Sensitivity: 50mV TO 200V/div 1,2,5 Sequence
- Coupling: AC, DC, GND
- Resolution: 8 bits
- Accuracy: ± (3% + 0.05 range/div)
- Modes: Single, Normal, Auto
- Samples per Division: 25
- Source: Internal
- Modes: Free Run, Normal
- Equivalent Time: 3 divisions or more
- Real Time: 2 divisions or more
- Plot Time: 30 sec/div to 1 hour/div
- Plot Data Type: Max/Min Selectable
- Memory: 2 Screens
TRUE RMS DMM