A complete bearing dismounting solution

The SKF Hydraulic EasyPull Set, TMMA 100H/SET, is the most complete dismounting kit available on the market. The set offers the unique combination of the hydraulic EasyPull, a tri-section pulling plate and a puller protection blanket. Combined together, the components of the set facilitate safe and easy dismounting of bearings, such as spherical roller and CARBŪ bearings, or other components, such as pulleys and flywheels.

Quick and effortless bearing dismounting

The hydraulic versions of the EasyPull, TMMA 75H and TMMA 100H, combine the user friendliness of the mechanical EasyPull with the effortless force generation provided by integrated hydraulic spindles. The pullers are protected from overload by safety valves built in their hydraulic spindles.

SKF TMMA 5E and TMMA 8E Hydraulic Easy-Pull

• Combines the user friendliness and safety of the mechanical EasyPull with the effortless force generation by an integrated hydraulic spindle

TMHP series Powerful self-centring hydraulic pullers

• Self-centring pullers for the occasions when large forces are inevitable
• Hydraulically assisted pullers with a maximum withdrawal force of 15, 30 or 50 tonnes (33,700 to 112,000 lbf)
• Pantograph system for ultimate alignment of withdrawal forces and minimised risk of damaging shaft or bearing
• Extreme forces applied with ease (self-centring, lifting handle, eye bolt, etc.)
• Can be supplied with or without the SKF hydraulic pump TMJL 100

Effortless bearing dismounting up to 100 kN

• The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US).
• The versatile puller kit includes three different arm sizes and
• Can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.

Easy bearing dismounting even in the tightest spaces

• Dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach
• Hydraulic and Mechanical versions available

Hydraulic Ram

• For easy and fast dismounting
• Easy force generation up to 8 tonnes (80 kN)
• Long stroke (175 mm/6.8 in)
• maximum reach increase of 338 and 475 mm/13.3 and 18.7

• Unique combination of a hydraulic jaw and a strong back puller for use in various applications
  
• High load rating of 100 kN (11.2 ton US) make the TMHC 110E suitable for use in many applications
  
• Hydraulic spindle facilitates easy and quick dismounting, effortless generation of force