TMHP series Powerful self-centering hydraulic pullers

The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces of puller power and safety. They are self-centering pullers for the occasions when large forces are inevitable.

• Hydraulically assisted pullers with a maximum withdrawal force of 15, 30 or 50 tons (33,700 to 112,000 lbf)
• Pantograph system for ultimate alignment of withdrawal forces and minimised risk of damaging shaft or bearing
• Extreme forces applied with ease (self-centering, lifting handle, eye bolt, etc.)
• Can be supplied with or without the SKF hydraulic pump TMJL 100

Technical data:

• TMHP 15/260
  • No. of arms: 3
  • Width of grip: 195-386 mm / 7.7-15.2 inches
  • Effective length of arms: 264 mm / 10.4 inches
  • Stroke: 100 mm / 3.9 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 150 KN / 33,700 lbf
  • Weight: 34 kg / 75 lbs
• TMHP 30/170
  • No. of arms: 3
  • Width of grip: 290-500 mm / 11.4-19.7 inches
  • Effective length of arms: 170 mm / 6.7 inches
  • Stroke: 50 mm / 2.0 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 300 KN / 67,400 lbf
  • Weight: 45 kg / 99 lbs
• TMHP 30/350
  • No. of arms: 3
  • Width of grip: 290-500 mm / 11.4-19.7 inches
  • Effective length of arms: 350 mm / 13.7 inches
  • Stroke: 50 mm / 2.0 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 300 KN / 67,400 lbf
  • Weight: 47 kg / 104 lbs
• TMHP 30/600
  • No. of arms: 3
  • Width of grip: 290-500 mm / 11.4-19.7 inches
  • Effective length of arms: 600 mm / 23.6 inches
  • Stroke: 50 mm / 2.0 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 300 KN / 67,400 lbf
  • Weight: 56 kg / 123 lbs
• TMHP 50/140
  • No. of arms: 3
  • Width of grip: 310-506 mm / 12.2-19.9 inches
  • Effective length of arms: 140 mm / 5.5 inches
  • Stroke: 40 mm / 1.6 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 500 KN / 112,000 lbf
  • Weight: 47 kg / 104 lbs
• TMHP 50/320
  • No. of arms: 3
  • Width of grip: 310-506 mm / 12.2-19.9 inches
  • Effective length of arms: 320 mm / 12.6 inches
  • Stroke: 40 mm / 1.6 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 500 KN / 112,000 lbf
  • Weight: 54 kg / 119 lbs
• TMHP 50/570
  • No. of arms: 3
  • Width of grip: 310-506 mm / 12.2-19.9 inches
  • Effective length of arms: 570 mm / 22.4 inches
  • Stroke: 40 mm / 1.6 inches
  • Maximum working pressure: 80 MPa / 11,600 psi
  • Maximum withdrawal force: 500 KN / 112,000 lbf
  • Weight: 56 kg / 123 lbs

Also available without hydraulic pump TMJL 100. Please add suffix "X" to designation when ordering (e.g. TMHP 30/170X).

Ordering details for parts and additional arms:
    No. 1 - 5 correspond to diagram below

• TMHP 15
  • -1: Arm - length 264 mm 10.4 in
  • -2: Arm - length 344 mm 14.2 in
  • -3: Arm - length 439 mm 17.3 in  
  • -4: Arm - length 689 mm  27.1 in
  • -5 Spindle with centre nib
  • -11 Repair kit More information Instructions for use
• TMHP 30
  • -1: Arm - length 170 mm 6.7 in
  • -2: Arm - length 350 mm 13.7 in
  • -3: Arm - length 600 mm 23.6 in
  • -4: Arm - length n/a
  • -5 Spindle with centre nib
  • -11 Repair kit More information Instructions for use
• TMHP 50 
  • -1: Arm - length 140 mm 5.5 in
  • -2: Arm - length 320 mm 12.6 in
  • -3 :Arm - length 570 mm 22.4 in
  • -4: Arm - length n/a
  • -5 Spindle with centre nib
  • -11 Repair kit More information Instructions for use