|
|
|
|
|
|
Reliability Direct 908 Series Vibration Meters
|
|
|
Meter Displays Vibration as Displacement, Velocity, Acceleration and High Frequency Acceleration
- Fits in your pocket.
- Advanced vibration analysis skills not required
- Supplied with vibration transducer, magnetic base and stinger
|
|
|
|
|
|
|
|
|
|
|
|
|
SKF CMVL 3600-IS-K-01 Intrinsically Safe Vibration Pen
|
Our Price: $3,534.30
|
|
|
Certified Intrinsically Safe (IS) in Europe and North America for use in hazardous areas- Simple but extremely effective means of checking the health of a machine
- Measures vibration and temperature to assess its operating state
- By putting MCD into the hand of plant or maintenance personnel, the frequency of checking can be increased, warnings can be received earlier and plant condition experts can be freed to focus only on specific problem areas
|
|
|
|
|
|
|
|
|
|
|
|
|
SKF TMEA 1PEx Intrinsically Safe Shaft Alignment Tool
|
|
|
Accurate alignment in explosive hazardous areas
- Intrinsically safe
- Standard printer
- Display unit provides clear "real-time" values
- User-friendly display unit with only five buttons for operation
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnet-Ex 12 Intrinsically Safe Magnet Probe
|
|
Our Price: $210.00
|
|
|
Magnet-Ex 12 magnet probe will locate magnetic fields in hazardous areas. The highly sensitive probe point of the Magnet-Ex 12 only needs to be brought near the coil of a solenoid valve to determine the presence of an electro-magnetic field.
- No Contact Required
- LED Indicator
- Pen Style Pocket Clip
|
|
|
|
|
|
|
|
|
|
|
|
|
FCX 2000 Intrinsically Safe Frequency Calibrator
|
|
Our Price: $1,998.00
|
|
|
The FCX2000 acts as a counter and transmitter for meter and sensor calibration in hazardous areas.
- Simple to use and operate
- Range of 0.01 to 10kHz
- Pulse, Frequency, RPM and more
- FM Approved for Zone 1 and 0 Hazardous Areas
|
|
|
|
|
|
|
|
|
|
|
|
|
1071-Ex Intrinsically Safe Ultrasonic Wall Thickness Gauge
|
|
Our Price: $3,340.00
|
|
|
With the 1071-EX, measurements of wall thicknesses are achieved using ultrasonics with various probes available to measure a range of 0.03" to 15.7" (0.7 to 400 mm).
- Probes can be easily and conveniently changed inside the hazardous area
- Easy to use and calibrate
- FM Approval
|
|
|
|
|
|
|
|
|
|
|
|
|
SDT 120 Explosion Proof Ultrasonic Inspection Kit
|
|
Our Price: $4,990.00
|
|
|
Specifically developed for the use in hazardous areas or environments where explosion risk exist- Approved and certified by the national institute for extraction companies (INIEX 85.101.049)
- Perform preventive and predictive inspections on all mechanical, pneumatic, hydraulic or electromagnetic systems
- Locate ultrasonic sources originating from air, gas, liquid or vacuum leaks, or friction in moving parts
|
|
|
|
|
|
|
|
|
|
|
|
|
TPI-HXG-2 Combustible Gas Leak Detector
|
|
Our Price: $269.95
|
|
|
No furnace installation or service work should be performed without doing a gas leak test. Check all pipes, fittings, and valves for gas leaks, if any leaks are found they should be repaired or replaced. As lightweight and portable as it is sensitive, the HXG2 helps you pinpoint the smallest leaks quickly and accurately. Its calibrated alarm will indicate dangerous concentrations of combustible gases. Use with Hetkit and AGA approved protocol to test for cracked heat exchanges.
- UL 913 intrinsically safe
- Calibrated to NIS traceable standards
- Instant response
- 10 ppm sensitivity
- Adjustable tic rate
- Settable alarm
- Visual and audible leak indication
- 16'' gooseneck
- Hard carrying case
|
|
|
|
|
|
|
|
|
|
|
|
|
CP 440 - Pressure Gauge
|
|
Our Price: $1,079.00
|
|
|
The CP 440 Digital Pressure Test Gauge takes the concept of an analog Test Gauge, and brings it to a new level, as only Beta Calibrators can do. The CP 440 combines the accuracy of digital technology with the simplicity of an analog gauge, and achieves performance, ease- of-use, and a feature set unmatched in the pressure measurement world.
- Very high accuracy compared to analog test gauges; ±0.05% F. S.; temperature compensated
- Temperature compensated accuracy over 0 to 50 °C
- Eight (8) standard pressure ranges
|
|
|
|
|
|
|
