Accurate alignment in explosive hazardous areas

The TMEA 1PEx is an intrinsically safe (Ex) shaft alignment tool, especially designed for use in potentially explosive hazardous areas. It has been tested and certified according to the latest ATEX standards in intrinsic safety zones generally found in industries such as the petrochemical, gas and pharmaceutical among others. The TMEA 1PEx is supplied standard with a thermal printer for recording of alignment activities.

• Intrinsically safe classification ATEX code: II 2 G, EEx ib IIC T4
• Standard printer facilitates recording of alignment activities
• Maximum distance of 1 m (3 ft) between the measuring units makes it suitable for aligning variety of applications
• Display unit provides clear "real-time" values during the alignment process making rechecking alignment unnecessary
• User-friendly display unit with only five buttons for operation

Thermal printer TMEA P1 - Keep track of alignment jobs
This compact thermal printer helps you to document your alignment jobs. A clear and complete printout of the measurement data shows that the machine has been properly aligned within the allowed tolerances.

• Compact easy-to-use printer
• Clear easy-to-read printout
• Pre-alignment and post-alignment reports possible
• Battery is rechargeable
• Continental European adaptor included
• Printer uses standard thermal paper roll (120 mm x 20 m) / (4.4 in x 65 ft)
• Can be used in combination with TMEA 1P/2.5 and TMEA 1PEx only

Download Datasheet
Download User's Manual

Technical data

• Measuring units:
  • Type of laser: Diode laser
  • Laser wave length: 670 - 675 nm
  • Laser class: 2
  • Maximum laser power: 1 mW
  • Maximum distance between measuring units: 1 m (3 ft)
  • Type of detectors: Single axis PSD, 10 x 10 mm (0.4 x .04 in)
  • Fixture Chain: standard
  • Magnetic: optional
• Display unit:
  • Battery type: Special type of LR 14 batteries
  • Operating time: 20 hours continuous operation
  • Displayed resolution: 0.01 mm (0.1 mil in "inch" setting)
• Complete system:
  • Contents:
    • Display unit
    • 2 measuring units with spirit levels
    • 2 mechanical shaft fixtures
    • 2 locking chains
    • 2 extension chains
    • 5 sets of shims
    • Measuring tape
    • Instructions for use
    • Certificate of calibration
    • Printer
    • Charger
    • Connection cable
    • Spare paper roll
    • Carrying case
  • Shaft diameter range; 30 - 500 mm (1.2 - 20 in)
  • Accuracy of system: Better than 2%
  • Ex classification: EEx ib IIC T4,
  • ATEX code: II 2 G Ex certificate number NEMKO No. 03ATEX101X
  • Temperature range: 0 - 40°C (32 - 104°F) without printer
  • Operating humidity: < 90 % without printer
  • Carrying case dimensions: 534 x 427 x 157 mm (21.0 x 16.8 x 6.2 in)
  • Total weight: (incl. Case) 8,9 kg (19.6 lb)
  • Calibration certificate: Valid for two years Warranty 12 months
  • Printing capability: Yes - printer is standard