LGLT 2 is a premium quality, fully synthetic oil based grease using a lithium soap. Its unique thickener technology and its low viscosity base oil (PAO) provide excellent lubrication performances at low temperatures (-50°C) and extremely high speeds.

• PAO oil provides excellent performances at low operating and start-up temperatures
• Low viscosity base oil and additive package offer excellent lubricating ability and EP/AW properties even at very high-speed factor (1.6x106 n.dm)
• Low friction when operating, low bearing running temperatures
• Quiet running during operation makes it suitable for use in small electric motors
• Extremely good protection against corrosion in wet and/or humid environments
• Excellent long grease life
• Compatible with bearing seals and cages made of NBR, FKM, PTFE and PA 6.6

Typical applications where LGLT 2 can provide excellent lubrication include:

• Textile spinning spindles
• Machine tool spindles
• Instruments and control equipment
• Small electric motors used in medical and dental equipment
• In-line skates

Bearing operating conditions

• Temperature - Low to medium
• Speed - Medium to extremely high
• Load - Low to medium
• Vertical shaft - Suitable
• Outer ring rotation - Suitable
• Oscillating movements - Not suitable
• Low friction - Recommended
• Shock load or frequent start up - Suitable
• Low noise - Recommended
• Severe vibration - Suitable
• Rust inhibiting properties - Recommended
• Water resistance - Recommended

Available pack sizes

• 0.2 kg tube
• 1 kg can
• 180 kg drum

Technical data

• DIN 51825 code : KP2G-50
• NLGI consistency class : 2
• Thickener/soap type : lithium
• Color : beige
• Base oil type : PAO
• Operating temperature range, ºC (ºF) : -50 to 110 (-58 to 230)
• Dropping point
  • DIN ISO 2176, ºC (ºF) : 180 min. (446 min.)
• Density
  • DIN 51757 at 20 ºC (68 ºF), g/cm³ 0,85-0,95
• Base oil viscosity
  • 40 ºC (104 °F), mm2/s : 18
  • 100 ºC (212 °F),mm2/s : 4,5
• Penetration DIN ISO 2137
  • 60 strokes, 10-1 mm : 265-295
  • 100,000 strokes, 10-1 mm : +50 max.
• Mechanical stability
  • Roll stability, 50 hours at 80 ºC, change 10-1 mm : 380 max.
  • SKF V2F test : -
• Corrosion protection - SKF Emcor:
  • standard ISO 11007 : 0 - 1
  • water washout test : -
  • salt water test (100% seawater) : -
• Water resistance
  • DIN 51 807/1, 3 hrs at 90 ºC (194 °F) : 1 max.
• Oil separation
  • DIN 51 817, 7 days at 40 ºC (104 °F), static, % : < 4
• Lubricating ability
  • SKF R2F, running test B at 120 °C : -
• Copper corrosion
  • DIN 51 811, 100 °C (212 °F) : 1 max.
• Rolling bearing grease life
  • SKF R0F test L50 life at 10 000 rpm, hrs : > 1000, 20,000 rpm at 110 °C (230 °F)
• EP/AW performance
  • Wear scar, DIN 51350/5, 1400 N, mm : -
  • 4 ball test, welding load, DIN 51350/4, N : > 2000
• Speed factor
  • Maximum n.dm value, for ball bearings : 1.600.000
• Designation : LGLT 2/(pack size)