Versatile two and three arm mechanical pullers

• Range of five different jaw pullers with two or three arms
• Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
• Cone system for automatic centring and secure positioning of arms
• Strong springs to keep arms apart for easy operation

Safe and simple bearing dismounting

Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 100) pullers differing in size and withdrawal force.

Powerful self-centring mechanical pullers

The SKF TMMP heavy duty jaw pullers provide perfect alignment and shaft protection as well as an exceptional grip for medium to large size bearings.

• 3 arm jaw pullers with a maximum withdrawal force of 6 to 15 tonnes (13,500 to 33,700 lbf)
• Unique pantograph system for grip width adjustment that counteracts misalignment during operation
• Fast, efficient and smooth handling
• Blackened, high quality steel with optimum corrosion resistance

Combined internal and external puller

• Both internal and external pulling
• Puller for use in every workshop
• Self-locking arms
• Special safety neck avoids damaging of thread and arms
• Extra hexagonal head on beam allows rotation during dismounting
• Gripping range from 12 to 350 mm (0.5 to 13.8 in)
• Also available as complete set on a stand

SKF TMMA Series Easy-Pull Spring Operated Jaw Pullers

• Equipped with spring- operated arms and safety pin, SKF's new patent-pending EasyPull is one of the most user-friendly and safe tools on the market today
• Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement of the hand

Slide impact hammer assisted pullers

• Easy removal of bearings in blind housings
• Positive bearing grip through collet expansion
• Prevents housing damage
• Six segment collets for efficient force application/transmission
• Supplied in a sturdy metal carry case

Internal Bearing Puller Kits, TMIP Series

• Easy removal of bearings from housings, decreases the amount of time to dismount the bearing
• Specifically designed to suit bearing bore diameters, making the selection of extractors easy. 
• Ergonomic sliding hammer facilitates ease of use
• SKF designed, patent pending

Easy dismounting of ball bearings in blind housings

The SKF TMMD 61 is an excellent bearing puller for removing ball bearings in blind housings. The kit comes complete with 6 different arm sets and 2 supporting spindles covering 61 different bearings from 10 to 100 mm (0.4 to 4 in) shaft diameters.

Removes bearing without dismantling machinery

• Unique adapter type puller for dismounting ball bearings in blind housings
• Balanced tension for reduced resistance and rapid extraction
• Supplied as kit in sturdy carrying case with 20 parts