 |
 |
 |
|
The Act-1B family of tachometers are Din rail or panel mounted and operate from either a single pulse per revolution, ten pulses per revolution, or sixty pulses per revolution. They are provided with either 115 VAC, 230 VAC or 12 VDC configuration. Optional 4-20mA, 0-5Vdc or TTL output.
Features:
-
1,10, or 60 pulses per revolution
-
Universal input, non contact operation from Optical, Infrared, Laser, Proximity and Magnetic sensors or direct TTL and 200 mV to 50 VAC signals.
-
Optional 4-20mA, 0-5 Vdc & TTL compatible output
Specifications:
-
Range: 5 RPM to 99,999 RPM
-
Resolution: + 1 RPM
-
Power Supply:
-
"Universal Input"
-
Analog Output: 4 to 20 mA dc with a maximum external excitation voltage of 40 Volts dc or 0 to 5 Vdc. External Power Source Required
Additional Information:
|
Speed Range: |
5 to 99,999 RPM |
|
Accuracy: |
±1 RPM or 0.005% of reading |
|
Resolution: |
1 RPM |
|
Display: |
5 digit, 0.56" (14 mm) high red LED. |
|
Display Update: |
Twice per second above 120 RPM. Programmable with PM Remote Software and USB programming cable. |
|
Dimensions: |
1/8 DIN by 4.5" (114 mm) deep. Panel cutout: 3.58" x 1.74" (91 x 44mm) |
|
Input Power: |
Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±10%, Isolated, 6.0 Watts. |
|
Inputs: |
Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac
input. Standard input is 1 pulse per revolution. |
|
Sensor Excitation: |
5Vdc or optional 12Vdc or 24Vdc to sensor. |
|
Recommended Sensors: |
Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W
Proximity - Monarch P5-11
Magnetic - Monarch M-190W or MT-190W
Infrared - Monarch IRS-W
Laser - Monarch ROLS-W, SLS-115/230
Inductive - Gas Engine GE-200 |
|
Analog Output:
(Optional) |
VOLTAGE (AO): 0 to 5 Vdc out, 5 mA 16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. or CURRENT (IO): 4 to 20 mA out, 16 bit resolution 12Vdc compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. |
|
Pulse Output:
(Optional) |
0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM
Remote Software and USB programming cable. |
|
Remote Programming: |
Unit can be remotely programmed using optional communications interface cable and PM Remote Software. |
|
Environmental: |
Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C. |
|
Electrical Safety: |
Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC |
Please make a selection from our Remote Tachometer Sensors.
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|