|
|
|
|
|
|
Extech 480172 3-Prong AC Line Splitter
|
Our Price: $14.99
|
|
|
AC Line Splitter Allows Clamp Meter to Measure AC Current on a 2-Wire or 3-Wire Power Cord to 15A
- Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
- Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
- Also features voltage check function
|
|
|
|
|
|
|
|
|
|
Extech 380193 LCR Meter
|
|
Our Price: $199.99
|
|
|
Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R)
- Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance)
- Set Hi/Lo limits using absolute values or percentage limits
- Parallel or Series equivalent circuit
- Automatic blown fuse indication
- Built-in test fixture or use external test leads
|
|
|
|
|
|
|
|
|
|
Extech 380224 Heavy Duty Phase Indicator/MultiMeter
|
|
Our Price: $119.99
|
|
|
3-phase sequence indicator plus MultiMeter with Frequency, Capacitance, and Temperature functions
- Functions include Phase, AC/DC Voltage, Capacitance, Resistance, Frequency, Temperature, Continuity and Diode Phase indicator identifies clockwise or counter-clockwise wiring configuration via direction of arrow on display
- Type K temperature measurements to 752°F (400°C)
|
|
|
|
|
|
|
|
|
|
Extech 380801 Appliance Tester and AC/DC Power Analyzer
|
|
Our Price: $629.00
|
|
|
Compact, Battery Operated Device For Analyzing AC Power Loads - With PC Interface Plus Datalogging
- Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
- Plug device to be tested directly into the Power Analyzer
- Max, Data Hold and Overload Protection
- Battery or AC adaptor provides line isolation
- Sampling (update) rate is 2.5 times/second
|
|
|
|
|
|
|
|
|
|
Extech 380803 Appliance Tester and AC/DC Power Analyzer Datalogger
|
|
Our Price: $729.00
|
|
|
Compact, battery operated device for analyzing AC/DC power loads — with PC interface plus datalogging
- Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
- True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
- Plug device to be tested directly into the Power Analyzer
- Max, Data Hold and Overload Protection
- Battery or AC adaptor provides line isolation
|
|
|
|
|
|
|
|
|
|
Extech 380940 400A AC/DC Mini-Clamp Meter and Watt Meter
|
|
Our Price: $309.99
|
|
|
Measures Watts, Current, And Voltage
- Large LCD with 40 segment analog bargraph
- Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication
|
|
|
|
|
|
|
|
|
|
Extech 380943 AC Leakage / Ground Current Clamp Meter
|
|
Our Price: $299.99
|
|
|
Clamp On Measurements Of Leakage/Ground Currents
- 4000 count display provides high 10µA resolution with fast bargraph (20/sec)
- Shielded transformer jaw minimizes the effect of stray magnetic fields
- Selectable 50/60Hz filter circuit to eliminate high frequency noise and harmonics
- Min/Max and Zero function
- Data Hold
|
|
|
|
|
|
|
|
|
|
Extech 380974 1,000 AC Clamp Meter and Phase Rotation Tester
|
|
Our Price: $169.99
|
|
|
Measurements Include Resistance, Capacitance, and Frequency
- Phase rotation function identifies phase sequence for 3 phase motor installations
- Wide Capacitance and Frequency ranges
- Large display with 40 segment bargraph
- Min/Max record/recall
|
|
|
|
|
|
|
|
|
|
Extech 382068 1,000A True RMS Clamp-On Power Datalogger Kit
|
|
Our Price: $699.00
|
|
|
Datalogs Up To 4000 Readings 1000A
- Clamp measures 1f or 3f (phase) power to 600kW
- Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
- Data Hold and Auto Power Off
- 25 point memory viewable on display
- Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, MIN/MAX
|
|
|
|
|
|
|
|
|
|
Extech 382075 2,000A True RMS 3-Phase Power Clamp-On Analyzer
|
|
Our Price: $629.00
|
|
|
Measures, Computes, and Displays 3-Phase Power on Balanced or Unbalanced Loads
- Display Lead/Lag Current/Voltage phase shift in degrees
- Store/recall last 5 readings
- DC Current Auto-Zero
- Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
- Advanced Relative and Min/Max functions
|
|
|
|
