 |
 |
 |
 |
The TI-25P Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion from only one side!
The TI-25P holds a single ultrasonic velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work.
Standard configuration: In its standard configuration, the TI-25P is factory set to measure steel.
Optional configuration: When required the TI-25P can be programmed to measure any other single material instead of steel. In order to program the gauge for use on any other material then factory steel, a sample of the material to be measured is required or the exact sound velocity of the material must be known.
Features
-
Resolution of 0.004 inch (0.04 mm)
-
The TI-25P probe is waterproof and can be submerged in water
-
Special-purpose probes are offered for a variety of applications
-
Switch-selected units for inches or mm
-
The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
-
For underwater surveying, probe cable lengths up to 15 meter are optionally
-
Large, backlit LCD display retains last reading
-
Comes complete with cable and software to transfer the velocity to the gauge.
The TI-25P is supplied as a complete kit with:
-
Programmable gauge,
-
Probe,
-
4 oz. bottle of coupling fluid,
-
2 AA batteries,
-
NIST Calibration Certificate,
-
Operating Instruction Manual
-
All in a foam-fitted carrying case.
-
For setting the ultrasonic velocity, a connection cable and software are supplied
-
Range in Steel 0.025-19.999" (0.63-199.9 mm)
-
Resolution 0.01 millimeter (0.001 inch)
-
Display 4½ - Digit, 0.5" Backlit LCD
-
Velocity Range 1250 to 10,000 meters/sec (.0492 to .3937 in/µs)
-
Probe 1/4", 5 MHz, actual wearface is 5/8" (17mm)
-
Probe Wearface PEEK (Polyethylethylkytone)
-
Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
-
Temp. Limits
-
Ambient: -30 to 50° C (-20 to 120° F)
-
Material: -20 to 100° C (0 to 200° F)
-
Special high temperature probes are optionally available
-
Battery Type Two AA batteries
-
Battery Life 200 hours
-
Weight 280 g (710 ounces)
-
Dimensions 64 x 114 x 32mm (2.5 x 4.5 x 1.25")
-
Accessories included
-
Probe/cable assembly,
-
4 oz. bottle of coupling fluid,
-
NIST Calibration Certificate,
-
2 AA batteries,
-
operating instructions,
-
hard-plastic carrying case.
-
Software Comes complete with cable and software to transfer the velocity to the gauge.
-
Warranty
-
Gauge: 5 Years
-
Probes: 90 Days
|
|
 |
 |
 |
 |
|
 |

| Accessories for this product... |
|
|
|

|