Subscribe to Our Newsletter
(Your shopping cart is empty)
SKF TKSA 80 v2 Wireless Shaft Alignment System
Our Price: $16,295.00
Sale Price: $
You save $2,300.00!
TKSA 80 v2 Advanced
Wireless Laser Shaft Alignment Tool
that increases alignment knowledge.
is the most advanced Shaft Alignment System in SKF's alignment family. It is designed to assist users with managing the alignment process for any rotating machinery, which consequently helps prevent decreased production caused by machine misalignment, and promotes reduced energy consumption and increased operating lifespan.
It is known that, for effective machinery alignment efforts, measurements represent only 5% of the process. Best practices in the alignment process itself are critical, and craftspeople often experience difficulties caused by omitting important alignment steps. The
system provides a complete built-in alignment process that properly advances users through the alignment effort, resulting in both improved alignment results and increased machinery alignment knowledge. The TKSA 80's alignment process advances users from preparation and evaluation through correction, and finally to reporting of alignment results.
In addition, the system offers a unique database that stores machine alignment setup data for future use, saving valuable time. And, with its seven inch screen, the
can accommodate large machine train alignment jobs.
Seven inch colored screen with touchscreen and keypad
Rugged design for use in harsh environments - 1.2 meter (3.9 feet) drop test to MIL-STD-810F
Built-in wireless technology
"Swap view" - enables graphics to be swapped from one side of the machine to the other to accommodate the user's position
Full template database
Energy efficiency indicator
Horizontal and vertical alignment
Large machine train alignment
Built-in pre-defined alignment process:
integrates a pre-defined alignment process into a portable instrument. It provides users with step-by-step instructions on how to perform alignment in the most effective and efficient sequence.
The right tools and materials at the right place at the right time.
The system reminds users of the correct tools and materials to use, before carrying out the alignment job.
Fast template - A database that stores relevant information for the equipment being aligned, such as machinery name plate data, current shims and shaft diameter for re-use in future activities.
Soft foot check - The system gives users the choice to find, correct and record soft foot conditions by either laser or by feeler gauges.
Visual inspection - Inspection fields are provided for oil level, leakages, foundation bolt status and wear indications, etc.
Horizontal and vertical shaft alignment - Measurements are performed at any of three positions, with a shaft rotation of as little as 40 degrees.
Machines train – Align three machines in a line (accommodates multiple machine train alignment).
Run-out check – The system reminds users to perform a simple measurement that discovers bent shafts.
The system assists users to compare inspection results with the information saved in the fast template so as to identify and prioritize corrective actions.
Real-time correction - The system displays the live actual value and direction for accurate misalignment correction.
Results in graphical format - The results are shown in graphical format and the file can be easily copied and pasted into documents on a PC.
The results show the machine conditions "as-found" and "as-corrected". Desired tolerances are also displayed.
Energy efficiency - The system reports estimated extra energy consumption due to misalignment.
Alignment reports are recorded in the system, which helps users periodically compare the alignment history and monitor the machine's health trend.
Check out our Shim Kits!
Our Precut Stainless Steel Shims are manufactured from the highest quality, corrosive-resistant stainless steel. The shims are dimensionally uniform and are marked for permanent easy to read identification.
Horizontal and vertical alignment, Machine train alignment, Alignment tolerance, Alignment target, Soft foot check, Visual inspection, Chocking arrangement, Full template, Data base
Sides: glass filled PBT
Maximum laser power
Distance between measuring units
Maximum: 10 m (33 ft)
Type of detectors
Linear CCD with length 36 mm (1.4 in.)
Low-power, industrial wireless network, 802.15.4 compliant
4 off 90 mm (3.5 in.), 4 off 150 mm (5.9 in.)
Can be screw together to increase length
2 x AA Alkaline or rechargeable battery
96 x 83 x 36 mm (3.8 x 3.3 x 1.4 in.)
326 g (11.5 oz)
7 inch diagonal colour LCD. Day light viewable with touch screen
1,2 m (3.9 ft) drop test to military standard
Rechargeable Li-ion battery and external power supply
10 hours continuous
276 x 160 x 53 mm (9.2 x 5.2 x 1.9 in.)
1 060 g (37.3 oz)
Display unit (battery included)
2 measuring units, 2 mechanical shaft fixtures
2 adjustable chains with tightening pin
2 extension chains
Rods: 4 x 90 mm (3.54 in.), 4 x 150 mm (5.9 in.)
Charger for display unit
Quick start guide
CD with instruction for use
1 000 alignments
Soft foot check
By laser or manually
Alignment tolerance check
User editable tolerances
Shaft diameter range
up to 300 mm (11.8 in.)
Chain included for shaft diameters
30 –300 mm (1.2–11.8 in.)
Displacement measurement accuracy
± 5 um ± 0.5%
-10–50 °C (14–122 °F)
Carrying case dimensions
534 x 427 x 207 mm (21 x 16.8 x 8.2 in.)
Total weight (incl. case)
7,6 kg (16.8 lb)
For shafts >300 mm (11.8 in.)
For mounting the measuring units in limited spaces or for large diameter shaft
For mounting the measuring units in limited spaces
Measure distance: Up to 10 m
Relative humidity: 10 to 90%
Temperature range: -10 to +50 °C
(14 to 122 °F)
Weight (with case): 7.64 kg
Display: Seven inch backlit color LCD, daylight viewable with touch
screen and keypad
Power: Rechargeable Li-ion battery and external power supply
Operating time on battery: Typical ten hours continuous operation
Storage memory: 64 MB
Housing: PC / ABS plastic with integrated lockable stand
x 160 x
Weight: 1 060 g
Environment protection: IP 65
Connectivity: Low-power, industrial wireless network, 802.15.4 compliant
USB: Host v1.1, device v1.1
Drop test: 1,2 m
Measurement units (A, B)
Type of laser: Red diode laser
Laser wavelength: 635 nm
Laser safety class: Class II
Laser output power: <1 mW
Measurement accuracy: Within 10 µm
Detector: Linear CCD with length 36 mm
Accelerometer accuracy: ±0,5
Accelerometer resolution: 0,1
Thermal sensors: -2 °C
Housing material: Chassis, aluminum sides, glass filled PBT
x 83 x
Weight: 326 g
Environment protection: IP 65
Ambient light protection: Optical filtering and ambient light signal rejection
Power supply: 2x AA alkaline batteries or rechargeable battery
Rod / fixing bar
Length: 4 off 90 mm, 4 off 150 mm, can be screwed together to increase length
Standard shaft diameter
Up to 300 mm
Browse for more products in the same category as this item:
Laser Shaft Alignment
Reliability Direct, Inc.
900 W. Main Street
Ephrata, PA 17522
Become an Affiliate
Send Us Feedback
Copyright © 2012 Reliability Direct, Inc.. All Rights Reserved.
Ecommerce Software by Volusion