Easy bearing dismounting even in the tightest spaces

The SKF TMBS E strong back pullers facilitate dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach. TMBS 100E and the TMBS 150E are equipped with a hydraulic spindle, which allows for effortless application of force up to 100 kN (11.2 ton US). The TMBS 50E is equipped with a mechanical spindle for force generation.

• Special separator design allows the puller to be easily inserted between the bearing and the shoulder on the shaft, even in the tightest spaces
• The firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
• High load rating of 100 kN (11.2 ton US) make the TMBS 100E and TMBS 150E suitable for use in many applications
• TMBS 100E and TMBS 150E offer complete hydraulic puller kits, allowing effortless generation of force
• The extension rods of the TMBS 100E and TMBS 150E allow easy and quick adaptation to required pulling length
• Maximum reach of 825 mm (32.5 in) and maximum shaft diameter of 150 mm (6 in) allow the TMBS E series to be used in many applications
• The hydraulic spindle is equipped with a safety valve, which limits the applied force to 100 kN (11.2 ton US), minimising the risk of puller overload
• The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it
• Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
• Pumping mechanism used for force generation is effortless and more efficient than turning mechanism
• Extension pieces of the hydraulic spindle allow quick adaptation to pulling length

Technical data

• TMBS 50E
  • Contents:
    • 1 x separator set
    • 1 x mechanical spindle
    • 1 x beam
    • 2 x main rods
  • Nominal working force: 30 kN (3.4 US ton force)
  • Maximum reach: 110 mm (4.3 in)
  • Shaft diameter range: 7 - 50 mm (0.3 - 2 in)
  • Maximum torque (T): 70 Nm (50 lbf ft)
  • Spindle Hexagon head (AF): 19 mm (0.8 in)
  • Weight: 1.8 kg (4 lb)
  • Carrying case dimensions: 295 x 190 x 55 mm (11.6 x 7.5 x 2 in)
• TMBS 100E
  • Contents:
    • 1 x separator set
    • 2 x main rods
    • 2 x extension rods, 125 mm (4.9 in)
    • 4 x extension rods, 285 mm (11.2 in)
    • 1 x beam
    • 1 x hydraulic spindle TMHS 100
    • 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in)
    • 1 x nosepiece with centre point for hydraulic spindle
  • Maximum stroke: 80 mm (3.1 in)
  • Nominal working force: 100 kN (11.2 US ton force)
  • Maximum reach: 825 mm (32.5 in)
  • Shaft diameter range: 20 - 100 mm (0.8 - 4 in)
  • Cycle life hydraulic cylinder Minimum 5000: cycles up to 100 kN (11.2 US ton force)
  • Threading hydraulic cylinder: UN 1½'' x 16 tpi
  • Safety valve setting hydraulic cylinder: 105 kN (11.8 US ton force)
  • Weight: 13.5 kg (29.8 lb)
  • Carrying case dimensions: 580 x 410 x 70 mm (23 x 16 x 2.8 in)
• TMBS 150E
  • Contents:
    • 1 x separator set
    • 2 x main rods
    • 2 x extension rods, 125 mm (4.9 in)
    • 4 x extension rods, 285 mm (11.2 in)
    • 1 x beam
    • 1 x hydraulic spindle TMHS 100
    • 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in)
    • 1 x nosepiece with centre point for hydraulic spindle
  • Maximum stroke: 80 mm (3.1 in)
  • Nominal working force: 100 kN (11.2 US ton force)
  • Maximum reach: 825 mm (32.5 in)
  • Shaft diameter range: 35 - 150 mm (1.4 - 6 in)
  • Cycle life hydraulic cylinder Minimum 5000 cycles: up to 100 kN (11.2 US ton force)
  • Threading hydraulic cylinder: UN 1½'' x 16 tpi
  • Safety valve setting hydraulic cylinder: 105 kN (11.8 US ton force)
  • Weight: 17 kg (37.5 lb)
  • Carrying case dimensions: 580 x 410 x 70 mm (23 x 16 x 2.8 in)