Easy, quick and affordable shaft alignment

The TMEA 2 is the latest addition to SKF's range of shaft alignment tools. The two measuring units can be easily attached to the shafts using magnetic brackets or chains. Each measuring unit emits a laser line, which is projected on the detector of the other unit.

• Display unit simultaneously provides clear "real-time" coupling and feet values during alignment process making rechecking of the alignment unnecessary
• Laser and scale lines for easy detection of the nature of misalignment
• "Soft foot" feature is shown on the digital display, which easily guides the operator through this function
• Display unit can be held using one hand, freeing the operator to perform the alignment
• Magnetic brackets allow easy fixture of the measuring units onto the shaft
• A set of blank alignment reports to help you keep record of your alignment jobs
• Maximum distance of 0.85 m (2.8 ft) between the measuring units

User friendly, three-step process; measure-align-document, no training required:

The pre-set machine dimension values facilitate quick data input

Display unit simultaneously provides clear "real-time" coupling and feet values during alignment process making rechecking of the alignment unnecessary

"Soft foot" feature is shown on the digital display, which easily guides the operator through this function

Display unit can be held using one hand, freeing the operator to perform the alignment

Only four buttons for operation, which simplifies the display unit

Magnetic brackets allow easy fixture of the measuring units onto the shaft

1. Laser and scale lines for easy detection of the nature of misalignment
2. Spirit levels allow easy positioning of the measuring units
3. Magnetic brackets, also suitable for chain connection
4. "Quick lock screw" for easy and fast tightening in different heights of the measuring units
5. Accurately finished steel rod for maximum stability (available in differents lenghts)
6. Wheel for vertical fine laser line adjustment

Download Datasheet
Download User's Manual
Download Demonstration Video
View Product Video

Technical Data:

• Measuring units:
  • Type of laser Diode laser
  • Laser wave length 670 - 675 nm
  • Laser class 2
  • Maximum laser power 1 mW
  • Maximum distance between measuring units 0.850 m (2.8 ft)
  • Type of detectors Single axis PSD, 8.5 x 0.9 mm (0.3 x .04 in)
  • Fixture Magnetic and/or chain
• Display unit:
  • Battery type 2 x 1,5V LR14 Alkaline
  • Operating time 20 hours continuous operation
  • Displayed resolution 0.01 mm (0.1 mil in "inch" setting)
• Complete system:
  • Content Display unit
    • 2 measuring units with spirit levels
    • 2 magnetic / mechanical shaft fixtures
    • 2 locking chains
    • 5 sets of shims
    • Measuring tape
    • Instructions for use
    • Certificate of calibration
    • Set of alignment reports
    • Carrying case
  • Shaft diameter range
    • Magnetic: 40 - 500 mm (1.6 - 20 in)
    • Chain: 40 - 150 mm (1.6 - 5.9 in)
    • Optional chain: 150 - 500 mm (5.9 - 20 in)
  • Accuracy of system Better than 2%
  • Ex classification -
  • Ex certificate number -
  • Temperature range 0 - 40°C (32 - 104°F)
  • Operating humidity < 90 %
  • Carrying case dimensions 390 x 340 x 95 mm (15.4 x 13.4 x 3.7 in)
  • Total weight (incl. Case) 3.7 kg (8.1 lb)
  • Calibration certificate Valid for two years Warranty 12 months
  • Printing capability No