Easy, cost effective inspection in restricted spaces

The SKF TMES 1 is a compact, lightweight endoscope that can be used for effective visual inspection even in the most restricted spaces. Equipped with a built-in variable light source and a flexible 1 metre (3.3 ft) long fibre optic tube it is suited to most industrial applications.

• Compact, lightweight design makes the endoscope easily portable
• High quality optics allow good image resolution for diagnostic purposes
• Fully flexible 1 metre (3.3 ft) fibre optic tube with a 40 mm (1.6 in) bending radius allows use in applications with tight corners
• Water resistant flexible tube can be used in applications where moisture is present
• Built-in battery powered light source can be adjusted to help prevent over illumination
• Length of handle can be reduced for use in areas with limited space
• Straight view allows the image at the tip to be directly seen without having to make time-consuming adjustments
• 60° field of view offers an excellent viewing range for restricted space applications
• Easy to assemble and use, thus special training is not required
• Digital camera adapter is available as an accessory in order to record results for report writing or sending image on for diagnostics
  • Not for medical applications

TMES 1 with optional digital camera adaptor
Camera not included

Technical Data:

• Weight (case and contents): 1135 g (2.5 lbs)
• Measurements (case size): 360 x 270 x 80 mm (14.1 x 10.6 x 3.1 in)
• Fibre
  • Fibre Material: Acrylic
  • Number of Pixels: 3500
  • Fibre strand diameter: 35 µm (0.0014 in)
  • Allowable ratio of fibre breakage: 2% maximum
• Cord
  • Fibre Material: SUS304 coated with PVC
  • Minimum bending radius: R 40 mm (1.6 in)
  • Light Source: Light type 3.5V 0.7A 2.55W
  • Power Supply 3x C (LR 14) batteries
• Optical data
  • Focal direction: straight
  • Angle of view: 60 °
  • Focal length: 10 mm (0.39 in) - ¥ (fixed focus)
• Water Resistance
  • Objective lens and fibre image tube is water resistant at an atmospheric pressure between 1 and 1.3 bar.
  • Eye piece is not waterproof.
• Working Temperature range -20 °C to 60 °C (-4 °F to 140 °F)
• Accesories: TMES 1-C Digital camera adapter