Effortless force generation up to 50 kN (5 tons imp)

The SKF advanced hydraulic spindle TMHS 5E effortlessly generates maximum force of 50 kN (5 tones imperial), facilitating the easy dismounting of bearings or other components. The spindle is equipped with an integrated hydraulic pump for force generation. The TMHS 8E is supplied with a nosepiece and three extension pieces, allowing easy and quick adaptation to the shaft's length.

• Integrated hydraulic cylinder and pump - no separate pump is required
• Safety valve prevents overloading the spindle and the puller it is used with in case excessive force is applied
• The spring-loaded centre point allows easy centring of the puller on the shaft without damaging it

Features:

• Generates a maximum withdrawal force of 50 kN (5 tons imp) and has a stroke of 75 mm (3 in)
• Suitable for use with SKF puller TMMA 5
• Equipped with a UN 1¼" x 12 tpi threading

Technical data:

• Contents:
  • 1 x hydraulic spindle
  • 2 x extension pieces; 50 and 100 mm (2.0 and 3.9)
  • 1 x nosepiece
  • 1 x language free instruction for use manual
• Maximum withdrawal force: 50 kN (5 tons imp.)
• Maximum stroke: (spindle) 75 mm (3.0 in)
• Maximum reach: 204 mm (8 in)
• Threading: UN 1¼" x 12 tpi
• Weight: 2,7 kg (6 lb)

Puller	Force generator
	Mechanical	TMHP -1	TMHS 5E	TMHS 8E	TMHR 8
	Mechanical  spindle	Hydraulic  spindle	Hydraulic  spindle	Hydraulic  spindle	Hydraulic  ram
TMMA 3	x	-	-	-	-
TMMA 5	x	-	o	-	-
TMMA 5E	-	-	x	-	-
TMMA 8	x	-	-	o	o
TMMA 8E	-	-	-	x	-
TMHP 8	-	x	-	o	o
TMBS 50	x	-	-	-	-
TMBS 100	-	x	-	o	o
TMBS 150	-	x	-	o	o
TMHC 108	-	x	-	o	o

                   x = standard       o = optional      - = not available