Thermal imaging for effective maintenance is now affordable

The SKF TMTI 300 is a flexible, easy-to-use thermal imager that produces visible images from invisible infrared radiation. It enables effective viewing of a wide range of temperatures for safe inspection of mechanical and electrical machinery.

• Easy-to-use, light weight, one or two handed operation allows the TMTI 300 to be flexible and used for most industrial applications
• Non-contact measurement technique enables measurements to be made safely on running equipment
• Large thermal image storage capacity, 1000 images per Mb can be stored on Pocket PC/storage card.
• Easy for data collection and subsequent reporting
• Two user defined spot temperature measurement points allow comparison of areas of interest. The temperature difference of the 2 spots is displayed as a separate value
• Both PC and “Pocket PC” compatible allowing flexibility in viewing results and report writing Software included for ease of data analysis
• Laser pointer shows the size of a pixel, allowing the area of interest to be pinpointed and for accurate temperature measurement
• Convenient temperature measurement in K, °C and °F eliminates the necessity to convert temperature reading
• 3 different selectable colour pallets (green/blue, red/blue, greyscale) for ease of viewing
• Tripod mounting thread for stability and stable monitoring over a period of time
• Sturdy “ready use” carrying case. The imager, pistol grip and pocket PC can be stored as one assembly ready for use.
• Ideal complement to other condition monitoring techniques, such as vibration analysis

The TMTI 300 is used to show a difference in temperature between two running bearings. This temperature difference could indicate a potential bearing problem that could lead to a failure and downtime

The TMTI 300 is used to inspect cable connections. The temperature of one of the cable connections is significantly higher than the others. This could indicate potential problems and should be further investigated.

A Pocket PC is required in order to view images. This must be obtained separately.

Download User's Manual

Technical data :

• Designation: TMTI 300
• Performance:
  • Temperature measurement Range: -10 to 300 °C (14 to 572 °F)
  • Field of view (FOV): 20° x 20°
  • Spectral response: 8 to 14 µm
  • Sensitivity: ~0.3 K @ 30 °C (@ 102.2 °F)
  • Displayed image: 96 x 96 pixels on Pocket PC && 128 x 128 pixels on PC Detector: 16 x 16 pixel array
  • Frame rate: 8 Hz
  • Range: 0.7m - infinity (2.29 ft - infinity)
  • Image storage: Up to 1000 images per Mb of Memory.
  • Laser Pointer: Class II laser
• Imager power supply :
  • Battery: 4 x AA (LR6) alkaline batteries 
  • Operation time: Up to 8 hours
  • AC operation: AC adaptor (supplied)
• Mechanical :
  • Housing: Impact resistant plastic
  • Dimensions :120x125x80 mm (3.72x4.92x3.1 in)
  • Weight: <600g (21.16 oz) not including 'Pocket PC' and handle
  • Mounting: Handheld & tripod mounting
• Environment :
  • Temp. operating range: -5 to 50 °C (23 to 122 °F)
  • Humidity: 10% to 90% non condensing
  • Temp. storage range: -20 to 80 °C (-4 to 176 °F)
  • CE mark (Europe) EMC DIRECTIVE 89/336/EEC as outlined in harmonized norm for Emission EN 50081-1, EN 55011 (B) Immunity EN 50082-2, EN 61000-4-2, -3, level 3. IP 40
  • Laser conformance: USA 21, CFR 1040.10
• Included accessories : 
  • Imager & handle
  • Software for 'Pocket PC' & PC
  • iPaq type synchronization cable
  • 2m RS232 connection cable - imager to PC
  • User manual
  • AC power supply
  • Tool case
• Computer requirements :
  • Pocket PC
    • Compatible with most 'Pocket PC' devices running Microsoft 'Pocket PC' 2000, 2002 and 2003
    • RS 232 to 'Pocket PC' communication cable or CompactFlash RS 232 adaptor where applicable.
• PC
  • IBM compatible PC
  • minimum of: 32Mb RAM
  • 300MHz processor
  • MS Windows (2000 and XP)
  • RS 232 serial port (115k Baud)
  • 16 bit colour graphics capability