|
|
|
|
|
|
CMCP-530A Vibration Velocity Monitor - Ordering Page
|
|
|
The CMCP530 Accelerometer based Velocity Monitor is available in either "Peak" or "True RMS" signal detection versions and English or Metric scaling. The CMCP530 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selectable range of 0.5, 1.0, 1.5, 2.0 and 2.5 in/sec (metric equivelant of 12.7, 25.4, 38.1, 50.8 and 63.5 mm/sec) with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-260 Series Junction Box Enclosures
|
|
|
Junction Boxes provide terminating centers for the outputs of accelerometers or other transducer field wiring- Oil resistant "O" Ring gasket
- NEMA 4 or NEMA 4X Enclosure
- Oil resistant "O" Ring gasket
- Corrosion resistant Quick Release latches
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-265 Termination Junction Boxes
|
|
|
Same Junction Boxes with DIN mounted terminals for field sensors- Up to 16 X Crew Clamp DIN Rail Mounted terminals
- Fiberglass, Stainless Steel, and Powder Coated Enclosures
- Mounting Screws, Clamps, and Gaskets Provided in package
- Custom Jobs at User Request
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-300 Series BNC Junction Boxes
|
Starting at: $175.00
|
|
|
BNC Junction Boxes For Easy Remote Access To Accelerometers- Individual BNC connection for each accelerometer
- Oil resistant "O" Ring gasket
- Internal and External BNC models
- Available in Fiberglass, Painted Steel and Stainless Steel
- Bezel tagging for channel identification
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-525A Vibration Acceleration Monitor - Ordering Page
|
|
|
The CMCP525A Acceleration Monitor is available in either "Peak" or "True RMS" signal detection versions. The CMCP525A is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 g's with a 100 mv/g Input.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-1100 General Purpose Industrial Accelerometer
|
|
|
Starts at: $109.00
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-200-01 Accelerometer Mounting Pad 1/4" Thick
|
|
Our Price: $9.00
|
|
|
Epoxy To Machine For Ideal Mounting of Industrial Accelerometers - 416 SS (non-magnetic)
- Lapped for ideal accelerometer mounting surface
- 1/4"-28 Tapped Hole
- 1/4" Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-420VT Loop Powered Vibration Transmitter
|
|
Our Price: $395.00
|
|
|
Solid state, loop powered vibration transmitter - Provides a 4-20 mA output that is proportional to overall vibration in terms of velocity
- Continuously monitors machinery health and transmits directly into a PLC or DCS
- Use for trending, alarm and machine shutdown.
- Provides access to the dynamic transducer output for portable data collector/analyzers
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual Parameter Loop-Powered Vibration and Temperature Transmitter
|
|
|
Dual Parameter Loop-Powered Vibration and Temperature Transmitter
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-200-02 Accelerometer Mounting Pad 3/8" Thick
|
|
Our Price: $9.00
|
|
|
Epoxy To Machine For Ideal Mounting of Industrial Accelerometers - 416 SS (non-magnetic)
- Lapped for ideal accelerometer mounting surface
- 1/4"-28 Tapped Hole
- 3/8" Thick
|
|
|
|
|
|
|
