SnakeEye is a low-cost hand held remote video inspection system. Lightweight, modular and portable, SnakeEye lets your eyes travel where you can't. Combining a CCD camera and TFT-LCD display technology, SnakeEye delivers crystal-clear, full color video at a fraction of the price of current remote video inspection systems. SnakeEye is modular in design so that it can be easily configured to inspect ... behind walls, inside ceilings, in and around pipes and machinery, under vehicles and aircraft, inside engine compartments, behind computer equipment, underneath automobile dashboards … the possible uses are endless.
SnakeEye is ideal for quick, non-destructive, qualitative inspections in hard-to-reach places. Hand Held Display Unit SnakeEye's lightweight, compact display unit (less than 2 lbs.) houses a high resolution (960 x 234) full color 5" TFT-LCD display and rechargeable battery pack. The display screen has a built-in protective, plastic cover and can be rotated to maintain proper image orientation for the viewer. Designed for easy one-handed operation, the display unit contains three color-coded push button controls: Power On/Off, Camera Head Light On/Off for operating in low light conditions, and Brightness Adjustment to see better in bright light conditions.
Two ports at the base of the display unit allow for additional plug-in capabilities: Video In/Out connects to a standard VCR for image recording and playback, AC/DC adapter and 12 volt auto adapter allow for continuous non-battery power operation.
Removable Camera Head
SnakeEye is equipped with a high speed CCD color camera with built-in LED illumination that delivers clear images in low light conditions, constant image clarity with variable object distance and minimum image distortion. The camera head contains four white LED's, which are controlled by the Camera Head Light button on the display unit. The water resistant camera head is 1" in diameter and is ruggedized for optimum performance in harsh environmental conditions.
When used in combination with the rigid wand, the camera head can be vertically articulated up to 90°. Interchangeable Camera Head Adapters The SnakeEye Rigid Wand Adapter is 18" long and contains a SureGrip handle as well as a swivel feature that allows the user to vertically articulate the camera up to 90°. The rigid wand configuration is designed to insert the camera into hard to reach spaces such as overhead air ducts and behind walls.
The SnakeEye Ring Adapter literally puts the camera on the user's finger. The ring adapter is designed to provide finger tip control of the camera in hard to see but reachable spaces such as underneath automobile dashboards and any place your hand can reach but your vision is obstructed.
SnakeEye extension cable adapters are comprised of heavy duty, plastic coated cable designed for use in harsh environments. These extension cables are available in multiple lengths and are suited for deep insertions such as chimney, pipe, and tank inspections.
Power System
SnakeEye comes equipped with a rechargeable Nickel-Metal Hydride battery pack and charger. The battery pack provides up to 2 hours of continuous operation. In addition to an On/Off control, SnakeEye's power management system contains a Brightness control that optimizes battery life, a Low Battery Indicator that alerts the user when 20% of the battery power is remaining and an Auto Shut-Off feature when the battery voltage falls too low.
Includes:
- Display Unit
- LED Camera
- 4' Cable
- Rigid Wand
- Finger Ring Adaptor
- Battry Pack
- Battery Recharger
- AC Adaptor
- DC Adaptor
- Carrying Case
- Instruction Manual
Accessories: SnakeEye Gooseneck
Position the camera in any desirable position with a rigid but flexible 3' cable.
SnakeEye Telescopic Wand Articulate the camera and hold the color display. Available in 4 different lengths.
SnakeEye Boroscope Adaptor Display smaller diameter applications on the color display. Interfaces with any boroscope to get into tighter areas than the standard camera would allow.
SnakeEye Mirror
A new mirror for the SnakeEye II is now available for those applications in tight access areas (less than 2 inch) diameter where the articulating wand is not adjustable due to limited space. The new mirror allows a "Dual View" to look ahead of the inspection and at the side wall of the ispection at the same time. Further, The camera outer diameter is only increased a minimal amount and screws on from the back of the ccd camera.
Applications:
- Industrial Maintenance
- Inspect machinery, pipes, valves, and welds...
- Corrosion Inspection
- Inspect internally corroded pipes, tanks, and structures...
- Aviation Maintenance
- Inspect airframes, engines, and instrument panels...
- Vehicle Maintenance
- See under dashboards...
- Underwater Inspection
- Inspect ship hulls, propellers, tanks, use underwater…
|
