The Tester T30 is a hand-held instrument for periodic machine condition monitoring. It is applied by leading industries all over the world for early fault detection, to avoid production losses through unplanned downtime, and to reduce the overall costs for maintenance. The Tester T30 uses all three leading condition monitoring methods.
On each machine you can select the combination of measurements that best meets your technical requirements:
Shock pulse measurement on rolling bearings supplies data on bearing damage, lubrication condition and the effects of alignment and load. In many applications, the bearings are the only machine elements which need monitoring.
Vibration severity measurement is the ISO recommended method for general condition monitoring. It detects the most common mechanical faults, such as unbalance, structural weakness, and loose parts.
Vibration monitoring with spectrum analysis allows you to target individual fault symptoms and get a machine specific condition evaluation.
In addition, the Tester T30 measures rotational speed and temperature. You can use the instrument for spot checks, for large scale data collection, and for long-time recording on a single measuring point.
The Tester T30 is available in three versions: Basic, Logger and Expert. At all levels, the measuring results are automatically evaluated and displayed against a green - yellow - red condition scale, highlighting all potential trouble spots. By calibrating and adjusting limit values, you can tune the automatic evaluation process with great precision and get an immediate, reliable diagnosis.
The Basic version requires manual recording of measuring results. Logger and Expert communicate with the SPM software CondmasterŪPro. This fifth generation program downloads measuring rounds from the PC to the T30, and uploads the measuring results for trend evaluation and data presentation.
T30 Basic Kit includes:
-
Machine Condition Tester, Basic
-
Shoulder Strap
-
Hand-Held Shock Pulse transducer for Tester/Analyzer
-
Tester Follow Up Form (Inch)
-
Carrying Case
-
T30 Instruction Manual
|
T30 Data Logger Kit includes:
- Machine Condition Tester, Logger
-
Shoulder Strap
-
Hand-Held Shock Pulse transducer for Tester/Analyzer
-
Condmaster 2008 Platform
-
Dbm/Dbc Module
-
RD-232 Cable - 9 pin
-
Spiral Cable with Connectors
-
Communication Module for T/A Models
-
Carrying Case
-
T30 Instruction Manual
- Condmaster 2008 Installation Manual
|
T30 Expert Kit includes:
-
Machine Condition Tester, Expert
-
Shoulder Strap
-
Hand-Held Shock Pulse transducer for Tester/Analyzer
-
Condmaster 2008 Platform
-
Dbm/Dbc Module
-
EVAM + Time Signal Module
-
RD-232 Cable - 9 pin
-
Spiral Cable with Connectors
-
Communication Module for T/A Models
-
Carrying Case
-
T30 Instruction Manual
- Condmaster 2008 Installation Manual
|
