 |
 |
 |
|
TheTI-25M-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
|
Pulse-Echo Mode
Pit & Flaw Detection
|
measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Measuring Range in Steel
|
|
Echo-Echo Mode
Through Paint & Coatings |
measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Measuring Range in Steel |
The TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
Features
-
Ability to measure through paint and eliminate coatings
-
Resolution of 0.001 inch (0.01 mm)
-
Large, backlit LCD display retains last reading
-
Simple operator controls virtually eliminate training
-
Special-purpose probes are offered for a variety of applications
-
Switch-selected units for inches or mm
-
For underwater surveying, probe cable lengths up to 50 feet are optionally
-
CE Certified Includes
-
NIST Calibration Certificate
The TI-25M-MMX is supplied as a complete kit with:
-
Gauge and Probe,
-
4 oz. bottle of coupling fluid,
-
2 AA batteries,
-
NIST Calibration Certificate
-
Operating Instruction Manual
-
Foam-fitted carrying case.
-
Range
-
Resolution .001" (0.01 mm)
-
Display 4½ - Digit, 0.5" Backlit LCD
-
Velocity Range 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second)
-
Probe 5 MHz, 0.25" Diameter (6.35 mm)
-
Probe Wearface PEEK (Polyethlethylketone)
-
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
-
Temp. Limits
-
Ambient: -20 to 120° F (-30 to 50° C)
-
Material: 0 to 200° F (-20 to 100° C)
-
Special high temperature probes are optionally available
-
Battery Type Two AA batteries
-
Battery Life 200 hours
-
Weight 7 ounces (196 g) Size 2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
-
Accessories Included
-
Warranty
-
Gauge: 5 Years
-
Probes: 90 Days
-
Limits
-
Minimum Radius for Convex Surfaces 0.350" (8.89 mm)
-
Minimum Radius for Concave Surfaces 3" (76.2 mm)
-
Minimum Headroom 1" (25.0 mm)
-
Minimum Sample Diameter 0.150" (3.8 mm)
-
Pit & Flaw Detection (Pulse-Echo) Mode
-
Maximum Coating 0.020" (0.50mm)
-
Minimum Wall 0.100" (2.54mm)
-
Maximum Wall 6.000" (152.4mm)
-
Thru-Paint (Echo-Echo) Mode (Standard)
-
Thru-Paint (Echo-Echo) Mode (Extended) - Specify when ordering
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
