(281) 957-5283

RDI on google+

We accept Visa, Mastercard, American Express and PayPal.




Subscribe to Our Newsletter


(Your shopping cart is empty)

  Home > Ultrasonic Inspection > Ultrasonic Inspection Kits >

Ultraprobe 2000 Analog Ultrasonic Detection System - Choose your kit
UP-2000S Analog Ultrasonic Detection System
 
Designed for ease of use, it often takes no more than 15 minutes to become competent in testing with the ULTRAPROBEŽ 2000 Kit Complete.

Intrinsically Safe - Class 1, Division 1, Groups A, B, C & D
Fast accurate diagnosis through the ULTRAPROBE 2000 System will dramatically reduce unplanned down time and shorten planned outage time. The ULTRAPROBE is the most versatile diagnostic instrument you'll ever need.



Item# Item Name Starts at Qty Add
UP-2000C UP-2000C Kit
$3,695.00
UP-2000KT UP-2000KT Kit
$4,495.00
UP-2000S UP-2000S Kit
$3,695.00
UP-2000SC UP-2000SC Kit
$4,295.00
Check the items you wish to purchase, then click


:
The ULTRAPROBE 2000 can be adapted to test practically any problem in operating equipment with such features as:
  • FREQUENCY TUNING enables a user to tune into problem sounds while minimizing background interference.
  • METER MODE selection adjusts the meter response from a real time response to an averaging response. This feature allows accurate adjustments for leak detection and for mechanical analysis.
The ULTRAPROBE 2000 heterodynes ultrasound into audible range providing accurate sound reproduction. Sensitive only to ultrasonic frequencies, the Ultraprobe 2000 will not respond to the low frequency noises often associated with most plant equipment. The ULTRAPROBE can be effectively utilized in extremely loud environments.
ONE INSTRUMENT TESTS THEM ALL
Contact Applications including:
  • Bearings
  • Gear Boxes
  • Line Blockage
  • Steam Traps
  • Valves
  • Compressors
  • Motors
  • Pipes
  • Flow Direction
  • Underground Leaks
Airborne Applications including:
  • Vacuum Leaks
  • Welds
  • Substations
  • Heat Exchangers
  • Seals
  • Pumps
  • Tanks
  • Air Brakes
  • Gaskets
  • Pressure Leaks (all types)
  • Electrical Arc (including CORONA)
  • Caulking (air infiltration)
  • Wind Noise Problems
  • Junction Boxes

ULTRAPROBE housing with Metered Pistol Grip, Ballistic Meter, Frequency Tuning Dial, Ten Turn Potentiometer, Numerically Calibrated Sensitivity Dial with Selection Lock, Bi-Modal Meter Selector switch, battery, battery indicator light, battery recharger receptacle and head set receptacle.

  • Trisonic scanning Module for locating airborne ultrasound such as pressure, vacuum and electrical leakage.
  • Rubber Focusing Probe for narrowing reception band of Scanning Module and for blocking out ambient ultrasound. Stethoscope (contact type) Probe for monitoring internally generated ultrasound such as in bearings, steam traps and valves.
  • Deluxe Industrial noise reducing Headset.
  • Video Training Tape Program
  • Extension Probe Kit to increase Stethoscope contact range to 31 inches.
  • Warble Tone Generator with amplitude selection switch for use in Tone Test method.
  • Battery Recharge Kit for main housing and Warble Tone Generator.
  • Zero Halliburton aluminum carrying case.
FACTORY MUTUAL RATED
Intrinsically Safe
Class 1, Division 1, Groups A, B, C & D
Exceeds ASTM-1002-96
Standards for ultrasonic leak detection
CE rated

UP-2000S
  • Pressure & Vacuum Leak Detection
  • Exhaust System Leaks
  • Heat Exchangers, Boilers, Condensers
  • Tanks, Pipes, Leak Testing, etc.
  • Electrical inspection
UP-2000C
  • Hydraulic Valve Bypass
  • Valve & Steam Trap Inspection
  • Bearing Testing
  • Gear/Gear Box Inspection
  • General Mechanical Inspection
UP-2000SC
  • Pressure & Vacuum Leak Detection
  • Hydraulic Valve Bypass
  • Exhaust System Leaks
  • Heat Exchangers, Boilers, Condensers
  • Valve & Steam Trap Inspection
  • Bearing Testing
  • Gear/Gear Box Inspection
  • Tanks, Pipes, Leak Testing, etc.
  • Electrical Inspection
UP-2000KT
  • Pressure & Vacuum Leak Detection
  • Hydraulic Valve Bypass
  • Exhaust System Leaks
  • Heat Exchangers, Boilers, Condensers
  • Valve & Steam Trap Inspection
  • Bearing Testing
  • Gear/Gear Box Inspection
  • Cockpit Window/ Hatch Leaks
  • General Mechanical Inspection
  • Tanks, Pipes, Leak Testing, etc.
  • Electrical Inspection
IF ATEX IS NEEDED PLEASE CALL TO INQUIRE.




Specifications:
CONSTRUCTION: Hand held metered pistol type made with anodized aluminum and ABS plastic
FREQUENCY RESPONSE: Detect ultrasonic frequencies between 20 kHz and 100kHz, continuously variable. Frequencies are converted to 100 Hz to 3 kHz audio.
PROBES:
  • Scanning Module: patented TRISONIC plug-in type consisting of a phased array of multiple transducers for airborne ultrasound. This probe is shielded against RF interface.
  • Rubber Focusing Probe (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit is at maximum sensitivity.
  • Stethoscope Module: plug-in type, insulated probe with RF shielding; 4 1/2" (11.4 cm) long steel probe tip, conically shaped for uniform surface contact. Probe tip is interchangeable. Stethoscope Extension Kit: 3 piece, segmented metal rods to increase stethoscope contact range 20" (50.8.cm) and 31" (76.2 cm).
TRANSMITTER: Patented warble tone transmission
HEADSET: Noise isolating type: double headset wired monophonic, impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
INDICATORS: Ballistic output meter: linear calibration scale of 0-100 for logging relative measurements. Meter is accurate 1% throughout entire scale. Low level Battery LED indicator for main housing internal power supply.
BATTERIES: Self contained nickel-cadmium rechargeable.
  • Recharging system: Standard 110V. Also available in 220V.
FEATURES:
    • Frequency tuning adjustment dial: Scale 20-100 kHz with "fixed band" positions for ultra-narrow frequency response.
    • Bi-Modal Meter Switch for logarithmic and linear meter scale adjustments.
    • Optional auxiliary mode selection for chart recorder output: 0 - 50 mV, Precision 10 turn adjustment dial with numerically calibrated sensitivity increments for finite gain adjustment.
    • Sensitivity Control, A 10 turn numerically calibrated adjustable potentiometer
    • Spring loaded trigger switch.

    OVER-ALL SIZE:
    • Complete kit in Zero Halliburton aluminum carrying case: 15" x 22" x 7" (38.1 x 55.9 x 17.8 cm). Pistol unit 2 lbs (.9kg).
    • Complete carrying case: 14 lbs (6.4 kg).

    SENSITIVITY:
    Detects .005" (.127 mm) dia. leak @ 5 psi (.34 bar) at a distance of 50 ft (15.24 m).
    THRESHOLD*: 1 X 10-2 1 X 10-3 std. cc/sec. freon
    WARRANTY: 5 Years parts/labor *depends on configuration
    ULTRAPROBE 2000 KIT:
    Meets and exceeds ASTM E1002-93 requirements for Leak Detection.
    GOVERNMENT CODES
    NSN: 6635-01-156-3927
    FSCM (CAGE) Code: 59202
    Table of Allowance #s:
    788, 404, 576, 583, 607
    Covered by one or more of the following patents: 4416145, EP015115, 502674183
    Factory Mutual System Approved
    Intrinsically Safe, Class 1, Division I, Groups A, B, C & D
    American Bureau of Shipping (ABS) TYPE APPROVAL 95-NY-166-X Det Norske Veritas (DNV) A-7038



Accessories for this product...
UP-UWC-9 Ultrasonic Wave Form Concentrator
Our Price: $1,795.00

Add
UP-UWC-9/10 Ultrasonic Wave Form Concentrator
UP-CFM-9/10 Close Focus Module
Our Price: $1,095.00

Add
UP-CFM-9/10 Close Focus Module
UP-2000 Replacement Battery
Our Price: $89.00

Add
UP-HTS-2 Holster Set for UP-9000
Our Price: $99.00

Add
UP-HTS-2 Holster Set for UP-9000


Browse for more products in the same category as this item:

Ultrasonic Inspection > Ultrasonic Inspection Kits
Intrinsically Safe > Ultrasonic Leak Detectors
Reliability Direct, Inc.
900 W. Main Street
Ephrata, PA 17522
 Contact Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback