The Ultraprobe 15,000 Touch is the ultimate inspection system. Used for almost any plant application, the system will measure, analyze and collect all data using simple touch screen technology during your route inspection. You have never experienced a system so robust, that it?s simple. Specific applications where the Touch is currently utilized are as follows:


Applications:
On Board Analysis of Mechanical Inspection/Trending

• Bearing/Conditions
• Rubbing Conditions
• Cavitation
• Gears/Gear Boxes
• Pumps/Motors
• Lack of Lubrication/Over Lubrication
  

On-Board Analysis of Electrical Inspection

• For detection and analysis of these failure modes:
• Arcing
• Tracking
• Corona
• For use in these applications:
• Switchgear
• Transformers
• Insulators
• Relays
• Bus Bars
  

On Board Analysis of Leak Detection/Energy Conservation

• Valves
• Steam Traps
• Compressed Air
• Compressed Gases (O2, NO, etc.)

Features:

• Touch Screen Technology
• Plan/Review Routes, Images and Sounds On-board
• Multiple Data Screens: dB/Temperature/ Spectral Analysis
• Take Temperature with Infrared Thermometer
• Adjust Emissivity
• Analyze Conditions with On-board Spectral Analyzer
• Photograph Test Points with On-board Camera
• Pinpoint Locations with Laser Pointer
• Review Alarm Groups & Generate Reports
• Store Data, Sounds, and Images
• Review Historical Record Data
• Use for ALL Plant Applications
  

  Download Datasheet

Construction: Hand-held pistol type made with coated aluminum and ABS plastic

Circuitry: Solid State Analog and SMD Digital Circuitry with temperature compensation and true RMS conversion

Frequency Range: 20 kHz to 100 kHz (tunable in 1 kHz increments)

Response Time: < 10 ms

Display: QVGA Touch Screen - IR, Laser Pointer, Camera, Spectrum Analyzer

Sound Recording: WAV File Format

IR Temperature: -20øC to 500øC

Camera: 2.0 Mega Pixel

Laser Pointer: All but Europe Output <5mW ? Wavelength 640nm ? Class IIIa Laser Product

Laser Pointer: Europe Only Output <1mW ? Wavelength 640nm ? Class II Laser Product

Memory: 400 storage locations

Battery: Lithium ION Rechargeable

Operating Temperature: 32øF to 122øF (0øC to 50øC)

Outputs: Calibrated heterodyned output, decibel (dB) frequency, SD card

Probes: Trisonic Scanning Module and Stethoscope Module, Long Range Module and RAS-MT

Headset: Deluxe noise attenuating headphones ? for hard hat use

Indicators: dB, Frequency, Battery Status and 16 Segment Bar Graph

Sensitivity: Detects .005? (.127 mm) diameter leak @ 5 psi (.34 bar) at a distance of 50 ft. (15.24 m)

Threshold*: 1 x 10 ?2 std. cc/sec to 1 x 10 ?3 std. cc/sec

Dimensions: Complete kit in Zero Halliburton aluminum carrying case 21.5? x 18.5? x 8? (55 x 47 x 20 cm)

Weight: Pistol Unit: 2.35 lbs. (1.1 kg)

Complete carrying case: 19 lbs. (8.6 kg)

Warranty: 1-year parts/labor standard, 5 years with completed warranty registration card.

Display Modes: dB (main), IR, ABCD, Spectrum and Application Specific, Spectrum Analyzer (modes): Spectrum, Time Series & Dual Specific *depends on leak configuration

Ultraprobe 15,000 Kit Meets and exceeds ASTM E1002-2005 requirements for Leak Detection.