| Designed for ease of use, it often takes no more than 15 minutes to become competent in testing with the ULTRAPROBEŽ 2000 Kit Complete.
Fast accurate diagnosis through the ULTRAPROBE 2000 System will dramatically reduce unplanned down time and shorten planned outage time. The ULTRAPROBE is the most versatile diagnostic instrument you'll ever need.
EFFICIENT MAINTENANCE TESTING: Now practically all equipment in one section can be tested by ONE man with ONE instrument, providing more efficient scheduling of routine Preventive Maintenance procedures.
The ULTRAPROBE provides data acquisition through three modes: through auditory channels (via a headset that has been specifically selected for heavy duty industrial use), through a uniquely designed bi-modal analog meter, and through the ability to switch to auxiliary interfacing for chart recorders (optional), vibration data collectors, spectrum analyzers, DAT & standard audio recorder.
The ULTRAPROBE 2000 can be adapted to test practically any problem in operating equipment with such features as:
- FREQUENCY TUNING enables a user to tune into problem sounds while minimizing background interference.
- METER MODE selection adjusts the meter response from a real time response to an averaging response. This feature allows accurate adjustments for leak detection and for mechanical analysis.
The ULTRAPROBE 2000 heterodynes ultrasound into audible range providing accurate sound reproduction. Sensitive only to ultrasonic frequencies, the Ultraprobe 2000 will not respond to the low frequency noises often associated with most plant equipment. The ULTRAPROBE can be effectively utilized in extremely loud environments.
ONE INSTRUMENT TESTS THEM ALL
Contact Applications including:
- Bearings
- Gear Boxes
- Line Blockage
- Steam Traps
- Valves
- Compressors
- Motors
- Pipes
- Flow Direction
- Underground Leaks
Airborne Applications including:
- Vacuum Leaks
- Welds
- Substations
- Heat Exchangers
- Seals
- Pumps
- Tanks
- Air Brakes
- Gaskets
- Pressure Leaks (all types)
- Electrical Arc (including CORONA)
- Caulking (air infiltration)
- Wind Noise Problems
- Junction Boxes
ULTRAPROBE housing with Metered Pistol Grip, Ballistic Meter, Frequency Tuning Dial, Ten Turn Potentiometer, Numerically Calibrated Sensitivity Dial with Selection Lock, Bi-Modal Meter Selector switch, battery, battery indicator light, battery recharger receptacle and head set receptacle.
- Trisonic scanning Module for locating airborne ultrasound such as pressure, vacuum and electrical leakage.
- Rubber Focusing Probe for narrowing reception band of Scanning Module and for blocking out ambient ultrasound. Stethoscope (contact type) Probe for monitoring internally generated ultrasound such as in bearings, steam traps and valves.
- Deluxe Industrial noise reducing Headset.
- Video Training Tape Program
- Extension Probe Kit to increase Stethoscope contact range to 31 inches.
- Warble Tone Generator with amplitude selection switch for use in Tone Test method.
- Battery Recharge Kit for main housing and Warble Tone Generator.
- Zero Halliburton aluminum carrying case.
FACTORY MUTUAL RATED
Intrinsically Safe
Class 1, Division 1, Groups A, B, C & D
Exceeds ASTM-1002-96
Standards for ultrasonic leak detection
CE rated
UP-2000S
- Pressure & Vacuum Leak Detection
- Exhaust System Leaks
- Heat Exchangers, Boilers, Condensers
- Tanks, Pipes, Leak Testing, etc.
- Electrical inspection
UP-2000C
- Hydraulic Valve Bypass
- Valve & Steam Trap Inspection
- Bearing Testing
- Gear/Gear Box Inspection
- General Mechanical Inspection
UP-2000SC
- Pressure & Vacuum Leak Detection
- Hydraulic Valve Bypass
- Exhaust System Leaks
- Heat Exchangers, Boilers, Condensers
- Valve & Steam Trap Inspection
- Bearing Testing
- Gear/Gear Box Inspection
- Tanks, Pipes, Leak Testing, etc.
- Electrical Inspection
UP-2000KT
- Pressure & Vacuum Leak Detection
- Hydraulic Valve Bypass
- Exhaust System Leaks
- Heat Exchangers, Boilers, Condensers
- Valve & Steam Trap Inspection
- Bearing Testing
- Gear/Gear Box Inspection
- Cockpit Window/ Hatch Leaks
- General Mechanical Inspection
- Tanks, Pipes, Leak Testing, etc.
- Electrical Inspection
IF ATEX IS NEEDED PLEASE CALL TO INQUIRE
|
