Fast accurate diagnosis through the ULTRAPROBE 2000 System will dramatically reduce unplanned down time and shorten planned outage time. The ULTRAPROBE is the most versatile diagnostic instrument you'll ever need.

EFFICIENT MAINTENANCE TESTING: Now practically all equipment in one section can be tested by ONE man with ONE instrument, providing more efficient scheduling of routine Preventive Maintenance procedures.

The ULTRAPROBE provides data acquisition through three modes: through auditory channels (via a headset that has been specifically selected for heavy duty industrial use), through a uniquely designed bi-modal analog meter, and through the ability to switch to auxiliary interfacing for chart recorders (optional), vibration data collectors, spectrum analyzers, DAT & standard audio recorder.

 

 

HOW ULTRASONIC TECHNOLOGY WORKS FOR YOU The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges. It electronically translates these signals by heterodyning them down into the audible range so that a user can hear these sounds through a headset and see them as intensity increments on the meter. Heterodyning works the same as a radio in that it accurately transforms the sounds so that they are easily recognized and understood. The advantage of Ultrasound technology is simple to understand. Ultrasound is a high frequency, short wave signal. When compared with the sounds we humans can hear, the size of the sound waves are extremely small. This property provides advantages:

The SKF TMSU 1 is a high quality, user friendly, sensitive instrument enabling the detection of air leaks by means of ultrasound.

 

The Whisper Ultrasonic Leak Detector will allow the user to check for pressure and vacuum leaks where other sniffer style leak detectors can't go, to the 40.5 kHz range.

Accurate detection of airborne ultrasounds is easier with the 21" or 32" flexible sensor. Hard to find leaks in complex pipe work are revealed quickly with this super sensitive sensor as its flexible design can be bent and shaped to fit your specific job.

Accurate detection of airborne ultrasounds is easier with the 21" or 32" flexible sensor. Hard to find leaks in complex pipe work are revealed quickly with this super sensitive sensor as its flexible design can be bent and shaped to fit your specific job.

Not all airborne ultrasound are easily detectable when distances separate the inspector from the source. Many facilities locate their distribution lines in the ceilings 50-100? from the plant floor making leak inspection impossible without scissor lifts, or ladder climbing. The Extended Distance Sensor combines design and function to overcome the problem of distance. Using a tapered angle design, the EDS module focuses airborne ultrasound from compressed air leaks and electrical faults. Detection of airborne ultrasound is possible up to 10 times the normal distances of ordinary airborne sensors.

The Parabolic Dish with Laser sighting increases the range of detection of the Ultrawave 170 to 250 feet and beyond. A recalculation of the parabola dimensions allowed us to decrease the diameter of the dish by over 75% and still increase its overall range by 20% Equipped with both a laser sight and a visual target sight the parabolic dish can pinpoint the source of airborne ultrasound indoors and out.

The Contact Probe is used for measurement of ultrasounds in structure borne applications. Its provides consistent trending of ultrasound generated by rotating equipment (bearings, gearboxes, couplings, etc?). Its unique tri-frequency filtering allows the user to digitally tune frequencies that reveal the earliest sign of bearing fatigue and lubrication failure.

Conditioned base lubrication is the trend of the future that is here today. The Acoustic Grease Gun Adaptor connects your Ultrawave 170 to any grease gun allowing lube techs to acoustically re-grease bearings hands free. The lube adaptor is available on its own, or equipped with an ultrasonic sensor designed to trend and evaluate frequencies associated with early lubrication failure.

The versatility of the Ultrawave 170 is enhanced with the use of the contact magnetic sensor. Ideal for monitoring slow speed bearings, trouble shooting hydraulics, pneumatics, steam traps, listening for electrical faults inside switch gear panels, and more. Its compact size and rugged stainless steel shell matches the longevity of all the products in the Ultrawave line up.