 |
 |
 |
|
The new CHECK-LINE TI-25M-UWM Underwater Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals at depths of up to 300 feet (91.44 M). The TI-25M-UWM can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
Features
Resolution of 0.001 inch (0.01 mm)
Large, backlit LCD display retains last reading
Simple operator controls virtually eliminate training
Special-purpose probes are offered for a variety of applications
300 feet depth rating
Clear plexiglass construction, Stainless steel connectors, latches, and control bar
Switch-selected units for inches or mm
CE Certified
NEW Elastic wrist strap secures the gauge during dives
The TI-25M-UWM is supplied as a complete kit including: 
-
Range in Steel: 0.025-6.00" (0.60-150.0 mm)
-
Resolution: .001" (0.01 mm)
-
Display: 4½ - Digit, 0.5" Backlit LCD
-
Velocity Range: 6,500-33,000 ft./sec (2000-10,000 m/sec.)
-
Probe
-
7.5 MHz,
-
0.25" Diameter (6.35 mm)
-
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors.
-
Optional lengths up to 50 ft. (15 m).
-
Temp. Limits
-
Ambient: -20 to 120° F (-30 to 50° C)
-
Material: -0 to 200° F (-20 to 100° C)
-
Special high temperature probes are optionally available.
-
Battery Type: Two AA batteries
-
Battery Life: 200 hours
-
Weight: 2.8 pounds Size 3.5 x 7.5 x 2.75" (63.5 W x 190.5 H x 69.85 D mm)
-
Accessories Included:
-
Probe/cable assembly.
-
4 oz. bottle of coupling fluid,
-
NIST Calibration Certificate,
-
2 AA batteries, operating instructions,
-
Hard-plastic carrying case.
-
Warranty
-
Gauge: 5 Years
-
Probe: 90 Days
-
Enclosure: 1 year
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
