Subscribe to Our Newsletter
(Your shopping cart is empty)
XCPro4 Class 1 Div. 2 Case for Surface Pro 4 Tablet
The XCPro4 allows you to take the world's most popular tablet, the Surface Pro 4 into Class I Div 2 hazardous environments!
The XCPro4 is designe to resist shocks, vibrations, dust, and water in indoor and outdoor environments. The XCPro4 allows you to connect securely to Wi-Fi and Bluetooth.
Safety Instructions & Regulations
1.Area of application
The XCPro4 is an Intrinsically Safe (ic) Ruggedized Surface Pro3 solution that is designed for industrial use in potentially explosive areas classified as C1D2 in accordance with directive 94/9/EC.
2. Safety precautions
These safety instructions contain information and safety regulations that must be observed to ensure safe operation under the described conditions. Failure to follow these instructions and this information can have serious consequences or constitute a violation of the applicable regulations.
Please read through these safety instructions carefully before starting to use the device! In the event of conflicting information, the safety instructions shall take precedence. In the event of any doubt, please contact Xciel.
3. Faults and damage
If there are grounds for you to believe that the safety of the device has been impaired, stop using it and remove it from the hazardous area immediately. Measures should be taken to prevent the device from being used again accidentally. The safety of the device may be impaired under the following circumstances:
The housing is visibly damaged.
The device has been exposed to excessive loads.
The warranty seal is damaged or has been removed.
The device has not been stored properly.
The device has been damaged in transit.
The marking or labeling on the device is illegible or non-existent.
The permitted limit values have been exceeded.
4. Safety regulations
By using the XCPro4, it is assumed that the user has observed the generally applicable safety regulations and that he/she has read the EC Declaration of Conformity to prevent any incorrect use of the device. The following must be observed without fail:
It is prohibited to use a display protection film.
The Surface Pro4 should not be removed from the rubber casing. A broken warranty label indicates that the intrinsic safety of the device is no longer guaranteed.
The specially designed nylon case should not be removed in the Ex-area. - The Surface Pro4 should not be charged in the Ex-area.
It must be ensured that the device is not taken into, or used in, hazardous areas classified as C1D1.
Do not submerge the Surface Pro4 under water.
Do not use or unplug the headset port in hazardous areas.
Failure to observe these safety instructions will result in expiration of the C1D2 Intrinsic Safety rating.
Classification: Class I, Division 2, Group A-D T6
Browse for more products in the same category as this item:
Reliability Direct, Inc.
900 W. Main Street
Ephrata, PA 17522
Become an Affiliate
Send Us Feedback
Copyright © 2012 Reliability Direct, Inc.. All Rights Reserved.
Ecommerce Software by Volusion