Powered by the microprocessor, this family of meters can easily measure average, hold or peak hold vibration data, and display them with user selectable unit/detection. The battery charge indicator and sensor bias indicator is also a standard feature of vPod and vPod II. vPod II has built-in memory for storing up to 1000 archive data points. It can transfer data through the RS-232C port with a PC.

 

The display is frozen by use of the hold function when the meter is in the moving average mode.

 

The vPod meter can measure very precise vibration levels using the gain mode.

 

The patented G-Spike™ enables you to quick connect the detection probe.

 

For those precision machines that have very low vibration levels, a precision reading is necessary. In addition to an extra quiet accelerometer that is supplied as a standard accessory, both vPod and vPod II incorporate a built-in gain circuit to amplify small vibration signals and show the reading in precision mode when you turn the gain mode on. This one button gain function allows the user to increase precision by one decimal place.

 

Each vPod and vPod II can measure vibration levels in acceleration, velocity or displacement. The users can select to display the vibration results in their preferable units and detections as shown in the photo above. The vPod and vPod II comes standard with a built-in 500 Hz high pass filter. This is significant because most roller element bearings' parts are located between 500 Hz - 2 kHz. This high pass filter method has been proven to be very useful in identifying a bearings condition.

 

MEMORY FOR DATA STORAGE (vPod II)
With the incorporation of built-in EEPROM memory, a vPod II meter can store up to 1000 sets of vibration data. These saved data points can be recalled by entering the meter's REVIEW mode. Every vPod II comes with an RS-232C interface program for downloading the saved data from memory to a PC for post analysis or report building.

 

 

Powered by the microprocessor this meter can easily measure average, hold or peak hold vibration data, and display them with user selectable unit/detection. The battery charge indicator and sensor bias indicator is also a standard feature of vPod and vPod ll. vPod ll has built-in memory for storing up 1000 archive data points. It can transfer data through the RS-232C port with a PC.

 

For those precision machines that have very low vibration levels, a precision reading is necessary. In addition to an extra quiet accelerometer that is supplied as a standard accessory incorporate a built-in gain circuit to amplify small vibration signals and show the reading in precision mode when you turn the gain mode on. This one button gain function allows the user to increase precision by one decimal place.

 

The vPod can measure vibration levels in acceleration, velocity or displacement. The users can select to display the vibration results in their preferable units and detections. The vPod come standard with a built-in 500 Hz high pass filter. The is significant because most roller element bearings' parts are located between 500 Hz - 2 kHz. This high pass filter method has been proven to be very useful in identifying a bearing condition.

 

With the incorporation of built-in EEPROM memory, a vPod ll meter can store up to 1000 sets of vibration data. These saved data points can be recalled by entering the meter's REVIEW mode. Every vPod ll comes with an RS-232C interface program for downloading the saved data from memory to a PC for post analysis or report building.

 

The Trendex software supports both vibration and temperature data. In the route data collection mode, vPod ll also can connect to an optional thermo meter for collecting temperature data. 

 

v-Pod Vibration Meter Kit-01 1 v-Pod 1 coiled accelerometer cable 1 hard carrying case 1 soft carrying case 1 user manual

v-Pod Vibration Meter Kit-02 1 v-Pod 1 coiled accelerometer cable 1 Accelerometer WR 786A 1 Accel mag. base 1 spike detection probe 1 hard carrying case 1 soft carrying case 1 user manual

v-Pod II Vibration Meter Kit-01 1 v-Pod II 1 coiled accelerometer cable 1 hard carrying case 1 soft carrying case 1 user manual

v-Pod II Vibration Meter kit-02 1 v-Pod II 1 RS 232 Cable + USB to RS232 adapter 1 coiled accelerometer cable 1 Accelerometer WR 786A 1 Accel mag. base 1 spike detection probe 1 hard carrying case 1 soft carrying case 1 user manual

 

---