Using ALL-TEST IV PRO® Greatly Increases the Profitability of Your Plant! Predictive Maintenance Regular testing can identify developing faults before a failure occurs. All measurement data can be trended for predictive maintenance condition monitoring. By making proactive repairs and eliminating unscheduled down-time, plant productivity is greatly improved.
New motors of any size can be defective. Spares "on the shelf" are often unknowns. A 2-minute test can insure that your motor will run once you install it!
When you have a motor related problem, the ALL-TEST PRO can quickly rule the motor "in" or "out"as the source of the problem. No false positives or negatives, with the ALL-TEST PRO you know exactly what the problem is or isn't! The ALL-TEST IV PRO finds the faults you can't see with any other hand-held instrument.
- Turn-to-turn, coil-to-coil, and phase-to-phase faults
- Open phases
- Burned or contaminated windings
- Poor connections
- Broken/cracked rotor bars and rotor casting voids
- Rotor eccentricity
- Grounded windings
- Cable faults
Easy To Use
An automatic test mode is used for most tests. On screen prompts walk you through the test. In just a few minutes, anyone can learn to use it!
On The Spot Diagnosis For Troubleshooting
ALL-TEST IV PRO 2000 results are immediately displayed for field evaluation. Our quick reference guide helps you make the call on the spot. Answer the mechanical/electrical question immediately, rule the motor "in" or "out".
Data Collector With Companion Software For PdM
The ALL-TEST IV PRO has enough memory to store 500 tests (more than a day's work). Upload test results to your computer, our software provides expert diagnosis, trending, and a wide variety of printed or on screen reports.
Convenient?Test From The Motor Control Center
Most tests on installed motors are done from the MCC, you can test through over 1000 feet of cable. Even hard to reach motors (overhead cranes, submersible pumps, etc) can be tested quickly and easily. In many cases you do not even need to disconnect from the drive output terminals! No need to test at the motor terminals unless a fault is indicated.
Safe For Operators And Equipment
All tests are performed on de-energized circuits. Measurement technology is low voltage and current, and completely non-destructive. Regular and repeated testing will not affect the life of the windings.
Quickly Evaluates The Entire Motor Circuit
A single 2 minute test evaluates the windings, cabling, and connections. Additional tests let you evaluate the rotor, and capacitors, and cabling to pinpoint the fault.
Detects motor faults at their earliest stages. Even detects conditions such as deteriorating or contaminated insulation long before other technologies.
Light Weight And Hand Held
The instrument weighs under 2 lbs, is battery powered and hand-held. No need to take a cart when you test a motor. And it can test virtually any size motor.
Tests All Kinds Of Motors And Coil Based Devices
All types of motors: induction, synchronous, DC, brushless DC, servo, wound rotor, even single phase motors.
All Components: induction windings and rotors, DC shunt and field windings, armatures, Field and rotor coils in synchronous motors.
Transformers: Single and 3-phase, pole and pad mounted.
The ALL-TEST IV PRO is supplied with:
- Test Leads
- PC Interface Cable
- TREND software.
- ATF11 Armature Text Fixture: for bar-to-bar testing of DC motor armatures in disassembled motors.
- M2000 Training Motor: A 1/3 HP 3-phase motor with known switch-selectable faults.
- EMCAT PRO Software: Comprehensive software for diagnostics and trending of AC motors, DC Motors, single phase motors, and transformers.
TREND® combines with your ALL-TEST IV PRO to create a powerful tool for troubleshooting and managing 3-phase motors. The database is designed to collect and organize nameplate information of your motors. For a manufacturing site, records can be grouped by building or process; for a service organization, you can group them by customer name and location.
Motor Diagnostics for Troubleshooting. TREND takes the guesswork out of interpreting test data. It provides a tabular and graphic view of the results, applies proprietary algorithms and automatically diagnoses likely motor faults on the screen. A built in report generator is included for printer output.
Motor Trending for Predictive Maintenance. For condition monitoring, all measurements can be trend-graphed. Increasing unbalances give you advance notice of deteriorating conditions. Planning for repairs and avoiding unscheduled down-time saves money and aggravation.
Scheduling and Review For scheduling purposes, TREND allows you to review motors to be tested
by date and then record completed work. You can even record test data from other technologies like infrared.
Upgrade from TREND 2003®. If you have been using our original TREND 2003 software, you can upgrade to TREND for a nominal fee. All test-data files can be directly imported,
analyzed, and trended. Contact the factory for details.
Upgradeable to EMCAT PRO®. Our EMCAT PRO motor management software adds diagnostics and trending for DC motors and Transformers as well as a powerful rotor diagnostic tool.
TREND can be easily upgraded to EMCAT PRO.