Home > Vibration > Analyzers and Data Collectors >

ADASH A4400 VA4 Pro, 4 channel Vibration Analyzer, Data collector, Balancer and Signal recorder
Adash A4400 VA4 Pro for Vibration Monitoring
Special Instructions: For Sale in the United States

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: CMS-VA4PRO-CMS

The A4400 instrument contains these measurement modes:
  • Data Collector (Route measurements)
  • Balancer
  • Signal Recorder
FFT spectrum with 25 600 lines
  • Extremely fast data acquisition
  • 4 channel simultaneous measurement of AC signals with tachometer
  • 4 DC channels for process measurements
  • Balancing Advisor helps you with balancing
  • New intuitive graphics interface for balancing

Measurement of 4 channel simultaneously gives a lot of flexibility in fault diagnosis. For instance, you can get a good insight of the alignment by measuring the radial and axial vibration across the coupling of the motor and pump.

120Gb allows 35 hours continuous recording of 4 channel raw signals up to 25.6kHz, so you can make the diagnosis later; and won't miss any transient behavior of the machine.

Simultaneous Measurement

Multi-measurements can be measured in parallel for a single measurement point, which save time; and improve consistency in data especially when the machine speed or running condition varies with time.

Example of multi-measurements:

  • Overall Velocityaccording to ISO-2732
  • Time signal (1k high pass filtered) for inspection of impacts due to bearing fault
  • FFT spectrum 0-20kHz, 25,600 lines
  • Envelope Spectrum

  • A4400 VA4 Pro provides professional 2-plane balancing function.
  • The whole balancing process will be guided on screen with easy-to-understand figures and instructions.
  • The weights will be automatically split and calculated for situations where the location of weights is limited, e.g. fan.

Data Collector
A4400 VA4Pro can be used as a Data Collector for routine data collection.

Parallel Measurements are performed simultaneously, that save time in data collection at each measurement point. It also improve consistency of data especially when the speed or process condition of the machine varies with time.

For experienced user, historical data can be downloaded for on-site trending and comparison, so that diagnosis can made on spot immediately.

Run-up / Coast Down

Run-up / Coast-down can be easily carried out on A4400 VA4Pro. Raw time data can also be recorded as a backup for critical machine. 4 DC Process Parameters can be measured at the same time for correlation analysis with vibration readings.

Different graph is available for run-up / coast-down analysis:

  • Bode plot (amplitude and phase vs. rpm)
  • Nyguist plot
  • Waterfall plot
  • Cascade plot

Software DDS 2010
One software for all instruments!
The Adash Ltd. keeps one rule all the time from 1991. The measured data from any instrument (portable or on-line) are saved in one data format to the database. It enables to use just one data acquisition software. The software system DDS 2011 contains all functions, which are necessary for next data analysis.
Main features:
  • Free updates available on our website
  • Bearing database (about 30 000 bearings)
  • High speed data processing
  • Reporting
  • Large databases
  • SQL server support
  • LAN connection
  • Technical support directly with the manufacturer

The Adash A4400 VA4 Pro CMS PRO Balance Kit includes functionality for Data Collection, Run-up Analyzer, Balancer, Recorder, FASIT, Stethoscope, Lubri and Octive Analyzer in one unit! System includes:

  • (1) A4400 VA4 Pro instrument
  • (2) Accelerometer
  • (2) Coiled cables
  • (2) Magnetic base sets
  • (1) Battery Charger
  • (1) Laser Tacho Stobe, mag base, cable, reflective tape
  • (1) Shoulder strap
  • (1) Transport case
  • (1) User Manual
  • (1) DDS 2011 Pro Software package
  • (1) Bearing Data Base
  • (1) A4400 Data Interface Software

On Board Bearing Database: This newly added feature offers the ability to select the type of your bearing and check the bearing fault frequencies directly on the VA4Pro during measurement.

Accessories for this product...
RDI MB075 Magnetic Base 3/4" Diameter ADASH VA4Pro Coiled Cable - 2-Pin 5015 connector to 7 pin connector ADASH VA4Pro Transport Case ADASH VA4Pro Analyzer/Data Collector Only
Our Price: $69.95

Please call for pricing

Please call for pricing

Please call for pricing

RDI MB075 Magnetic Base 3/4" Diameter ADA-VA4Pro Coiled Cable ADA-VA4Pro Transport Case ADA-VA4Pro Analyzer/Data Collector Only
ADASH DDS 2011 Software
Please call for pricing

ADA-VA4Pro 4 channel Vibration Analyzer, Data collector, Balancer and Signal recorder

Browse for more products in the same category as this item:

Vibration > Analyzers and Data Collectors
All Categories > Balancing > Balancing Instruments
Manufacturers > Adash